SMEG ASC71S User Manual
Download Operation & user’s manual of Smeg ASC71S Dryer for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
15
EN
Water tank
Warning light starts flashing when the tank is
filled with water. The dryer stops operating if
the warning light turns on when a programme
is running. Drain the water in the water tank to
restart the dryer. Press “Start/Pause/Cancel”
button to start the programme after you have
emptied the water tank. The warning light turns
off and the programme resumes operating.
Time delay
If you wish to dry your clothes at a later time,
thanks to the time delay function, you can delay
the program start up to 3 hours, 6 hours or 9
hours.
1. Open the loading door and put the laundry
in.
C Make sure that all air outlets are open, door
filter is cleaned and the water tank is empty.
2. Set the drying program and, if required, the
auxiliary functions.
3. When the time programming button is
pressed once, a 3 hour delay is selected
and the relevant led lights. When the same
button is pressed again, 6 hours; and if
pressed once more, 9 hours delay will be
selected. If the time programming button
is pressed one more time, time delaying
function will be cancelled. Set the time delay
as you require.
4. Delayed operation of the selected program
is started by pressing the “Start/Pause/
Cancel” button after selecting the time
delay.
C Additional laundry may be loaded / taken
out during the time delay period.
C During the time delay period, laundry is
rotated for 4 seconds in every 10 minutes to
prevent creasing.
Canceling the time delay
If you want to cancel the time delay countdown
and start the program:
1. Press “Start/Pause/Cancel” button for about
3 seconds.
2. Press “Start/Pause/Cancel” button to start
the program right away.
Starting the programme
1. Press “Start/Pause/Cancel” button to start
the programme.
2. Light of the “Start/Pause/Cancel” button will
turn on to indicate that the programme has
started.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step, the
relevant indicator LED will light up and light of
the completed step will turn off.
“Drying”:
- Drying level will be illuminated during the
whole drying process until the drying degree
reaches “iron dry”.
“Iron Dry”:
- Starts to illuminate when the drying degree
reaches “iron dry” step and remains illuminated
until the next step.
“Cupboard dry”:
Starts to illuminate when the drying degree
reaches “Ready to wear” step and remains
illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the program comes to an
end and anti-creasing function is activated.
C If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).
Changing the programme after it has
started
You can use this feature to dry your clothes
under higher or lower temperatures after your
dryer has started.
For example;
1. Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel”
the programme in order to select “Extra
Dry” programme instead of “Iron Dry”
programme.
2. Select the “Extra Dry” programme by
rotating the programme selection button.
3. Press “Start/Pause/Cancel” button to start
the programme.
C Press “Start/Pause/Cancel” button for
3 seconds to cancel the programme or
turn the programme selection knob in any
direction to end the programme while the
machine is running. Water tank and filter
cleaning warning lights turn on to warn the
user when the programme is cancelled by
pressing the “Start/Pause/Cancel” button
for 3 seconds. However, the warning