SMEG CB30PFNF User's Manual
Download Operation & user’s manual of Smeg CB30PFNF Freezer for Free or View it Online on All-Guides.com.
1. Loosely release the screws ❶,
❸ of the hinge on the case part
of the freezer and then
separate the door by pushing it
to the right (See Figure 23).
2. Release the No. ❶, ❸
completely and then fix them
loosely to the reverse side (See
Figure 24)
3. Separate the hinge by releasing
the No. ❷, ❹ bolt to the door.
4. Move the separated hinge
(Figure 24) diagonally and fix it
to the door by turning it 180˚.
5. Push the hinge from the left
side to the right side to ensure
that the door hinge and the
screws fixed to the case match.
6. Adjust the top/down or the
left/right interval of the
refrigerator door so that
leaning should not occur to
either side, and then tighten
screws.
7. If the hinge bolting is
completed, insert the ⑪cap
screws at the opposit side of
the hinge (6 places).
※
Same as above order for change of the door open direction of the cold store room door.
※ Perform work after changing the door before installation.
(Fig. 23)
(Fig. 24)
6. Order of Installation
7) Change of Door Open Direction of Refrigerator
37