• Home
• Brands
• Smeg Manuals
• Smeg CH300
• Smeg CH500 Instructions For Use Manual

Smeg CH500 Instructions For Use Manual

Download User manual manual of Smeg CH300 Freezer for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

7

GB

Electrical connection

Operation and function

Mechanical controls

In addition to a thermostat knob, the control

panel contains two control lamps and a but-

ton (g. 4). Control panel design and lamp

position may vary.

The green lamp is lit when power is cor-

rectly supplied.

The yellow lamp is lit when the Super

Freeze button has been pressed (see Super

Freeze).

Starting up

Connect the appliance to the socket outlet.

The green lamp lights up to indicate that

power is supplied. The red lamp on the con-

trol panel will also light up to indicate that

the temperature inside the freezer is not yet

sufciently low.

Temperature setting

The temperature is set by turning the

thermostat knob from MIN to MAX. It is

recommended that a coin be used to turn

the knob. The more the thermostat knob is

turned towards MAX, the lower the tempera-

ture. To test whether the setting is correct,

measure the temperature of the uppermost

item in the centre of the freezer.

It must be no warmer than –18 °C.

Super Freeze

If more than 3 kg of fresh items are to be

frozen, proceed as follows:

1. Press the Super Freeze button (the

yellow lamp lights up). The freezer then

operates at maximum capacity (the com-

pressor runs continuously).

2. Activate Super Freeze 24 hours before

placing fresh items in the freezer.

3. After placing fresh items in the freezer,

leave Super Freeze on for a further 24

hours.

4. Then press the Super Freeze button

again (the yellow lamp goes off).

Acoustic alarm

When plugging in the unit an acoustic alarm

will activate. Push the yellow button to

deactivate the alarm. Notice that the alarm

must be activated again after 24 hours by

pushing the yellow button.

-18

g. 4