Smeg 3EM-374B Instruction Manual

Download Instruction manual of Smeg 3EM-374B Hob for Free or View it Online on All-Guides.com. This version of Smeg 3EM-374B Manual compatible with such list of devices, as: SD70SX, SE70S-1, SE70SXHK, VA73VX, WE706EBS

Smeg 3EM-374B Instruction manual - Page 1
1
Smeg 3EM-374B Instruction manual - Page 2
2
Smeg 3EM-374B Instruction manual - Page 3
3
Smeg 3EM-374B Instruction manual - Page 4
4
Smeg 3EM-374B Instruction manual - Page 5
5
Smeg 3EM-374B Instruction manual - Page 6
6
Smeg 3EM-374B Instruction manual - Page 7
7
Smeg 3EM-374B Instruction manual - Page 8
8
Smeg 3EM-374B Instruction manual - Page 9
9
Smeg 3EM-374B Instruction manual - Page 10
10
Smeg 3EM-374B Instruction manual - Page 11
11
Smeg 3EM-374B Instruction manual - Page 12
12
Smeg 3EM-374B Instruction manual - Page 13
13
Smeg 3EM-374B Instruction manual - Page 14
14
Smeg 3EM-374B Instruction manual - Page 15
15
Smeg 3EM-374B Instruction manual - Page 16
16
Instructions for the installer
4. GAS CONNECTION
Connection to the gas mains may be made with a rigid copper pipe or
with a flexible pipe and conforming to the provisions defined by standard
regulations in force.
To facilitate connection, fitting A on the rear of the appliance may be
adjusted laterally. For this purpose, loosen hexagon nut B, turn fitting A
to the desired position, and retighten hexagon nut B (tightness is ensured
by a biconical brass ring). Use a soapy solution to check for proper
tightness. Never use a free flame.
The hob has been inspected for G20 (2H) natural gas at a pressure of
20 mbar. For use with other types of gases, see Section “5.
ADAPTATION TO DIFFERENT TYPES OF GAS”. The gas intake fitting
is ½” gas external threaded (ISO 228-1).
Connection with rigid copper pipe:
the connection to the gas mains must
not provoke stress of any kind on the
hob.
Connection may be made by using
biconical adapter D with insertion of
gasket C (supplied).
Connection with flexible pipe: use
only flexible pipes conforming to
standard regulations in force, inserting
gasket C (supplied) between fitting A
and flexible pipe E.
The flexible pipe has to be installed so that pipe length does not exceed
1.5 meters of maximum extension. Make sure that the pipes do not touch
any moving parts or become damaged.
27