Smeg T18G8X2UG Instruction Manual

Download Instruction manual of Smeg PDX30B Hob for Free or View it Online on All-Guides.com. This version of Smeg PDX30B Manual compatible with such list of devices, as: PDX30B-1, PDX30C-1, PDX30F, PDX30R-1, PDX30S

Smeg PDX30B Instruction manual - Page 1
1
Smeg PDX30B Instruction manual - Page 2
2
Smeg PDX30B Instruction manual - Page 3
3
Smeg PDX30B Instruction manual - Page 4
4
Smeg PDX30B Instruction manual - Page 5
5
Smeg PDX30B Instruction manual - Page 6
6
Smeg PDX30B Instruction manual - Page 7
7
Smeg PDX30B Instruction manual - Page 8
8
Smeg PDX30B Instruction manual - Page 9
9
Smeg PDX30B Instruction manual - Page 10
10
Smeg PDX30B Instruction manual - Page 11
11
Smeg PDX30B Instruction manual - Page 12
12
Smeg PDX30B Instruction manual - Page 13
13
Smeg PDX30B Instruction manual - Page 14
14
Smeg PDX30B Instruction manual - Page 15
15
Smeg PDX30B Instruction manual - Page 16
16
Smeg PDX30B Instruction manual - Page 17
17
Smeg PDX30B Instruction manual - Page 18
18
Smeg PDX30B Instruction manual - Page 19
19
Smeg PDX30B Instruction manual - Page 20
20
Smeg PDX30B Instruction manual - Page 21
21
Smeg PDX30B Instruction manual - Page 22
22
Smeg PDX30B Instruction manual - Page 23
23
42
Instructions for the Installer
8. INSTALLING THE APPLIANCE
8.1 Fitting the appliance in the top
This appliance is in class 3. The procedures required below must be
carried out by a skilled builder and/or joiner.
The hob can be installed on various materials, including masonry, metal,
solid wood and wood finished with plastic laminates, provided the material
is heat-resistant (T 90° C).
8.1.1 Fixing to the supporting structure
To install the appliance the opening “
B
” and the holes “
A
” shown in figure 1
must be made in the top; see figure 2 for the relative dimensions and
distances. The foam rubber strip
C
” (Fig. 1) is supplied with the appliance,
and must be fixed with its adhesive side facing towards the supporting surface.
The area inside the dotted line marks the external dimensions of your
appliance. Make sure that there is at least
750 mm
between the hob burners
and any shelving placed vertically above them (Fig. 3). If the top is more than
20 mm thick, the hole required to install the hob is shown in figure 4.
1) 2)
3) 4)
The distance “Y” is the
difference between the total
thickness of the top and the
depth of the hole ø7, which is
always 20 mm.