Gigabyte GH-PSU21-FB Installation Manual

Download Installation manual of Gigabyte GH-PSU21-FB Air Conditioner for Free or View it Online on All-Guides.com.

Brand: Gigabyte

Category: Air Conditioner

Type: Installation manual for Gigabyte GH-PSU21-FB

Pages: 1 (1.43 Mb)

Download Gigabyte GH-PSU21-FB Installation manual

Gigabyte GH-PSU21-FB Installation manual - Page 1
1
Figure B
1. Universal design for all LGA775 and AMD AM2 / K8 platforms.
2. Copper core with Aluminum ns provide large heat dissipation.
3. Angular conical airow ensures maximum cooling of MOSFET areas.
4. Spiraling n design for increased surface volume ventilation.
5. Omni-directional high-conducting heat pipe for maximum dissipation in any
mounted position.
6. Large 120 mm fan with fan speed control cable, for a quiet and effective
operation.
7. Easy installation.
Installation Guide
Accessories
1) AMD K8 / AM2
Clip x 1
2) 775 Bracket x 2
3) Thermal Grease x 1
4) 775 Bracket screws
x 4
AMD K8 / AM2 Platform Installation
STEP 1 STEP 2
STEP 3
STEP 4
STEP 5
Apply some thermal grease on the CPU
properly.
Caution :
Before installation, please
turn off the power, unplug the
power cord, and be sure to
remove the sticker from the
bottom of the cooler unit.
Unlock screws on the AMD bracket and
remove the bracket.
Place the two 775 brackets between the copper base and the cooler unit.
Align the holes of the bracket with the holes of the copper base. Secure the 775 brackets
with supplied bracket screws. Make sure the screws are evenly and rmly fastened.
Before installation, please make sure the pin is on the right direction ( as Figure A ).
To remove the cooler, turn the four pins to the removing
direction ( as Figure B ) and pull them up.
Plug the 3-pin connector of the cooler
into the motherboard’s CPU fan socket.
Figure A
STEP 6
Align the pin of the cooler with
the hole of the CPU on the
motherboard and push down
the pin diagonally.
Please make sure the four
pins are rmly secured.
STEP 1
Mount the AMD K8 / AM2
clip on the AMD bracket of
the cooler.
STEP 2
Caution :
Before installation, please turn off the power, unplug the power cord, and be
sure to remove the sticker from the bottom of the cooler unit.
STEP 3
Lock the tab on the other
side of AMD K8 / AM2 clip in
the salient point of the CPU
cooler bracket; push down
and secure the bar on the
clip rmly.
STEP 4
Lock the tab on one side of
AMD K8 / AM2 clip in the
salient point of the CPU
cooler.
STEP 5
Plug the 3-pin connector of the cooler
into the motherboard’s CPU fan socket.
Apply some grease on the CPU properly.
LGA 775 Platform Installation
GH -P SU 21 -F B
The followings are not covered by the warranty :
1. Use the product incorrectly or in a manner other than the designed purpose.
2. Nonobservance of the proper operation. ( e.g. over-clocking )
3. Malfunction due to interference from other devices.
4. Unauthorized modication of the product.
5. Malfunction due to unt specications on Motherboard.
6. Malfunction arising from casualties ( earthquake, thunder, re, and ood ).
7. The product’s warranty label has been removed or damaged.
8. The devices inside, including power supply, hard disk, CD-ROM drive, motherboard,
cooler, etc, are not detached from the chassis prior to the transpor tation of the
computer product, resulting in damage to the cooler or computer-related devices.
9.Any damage caused by nonobservance of the installation instruction contained in this
manual.
The cooler fan speed levels provided are for reference use only.
Please refer to the motherboard BIOS to verify actual fan speed levels.
Specication
Cooler Dimension : 122 x 125 x 141 mm
Fan Dimension : 120 x 120 x 38 mm
Heat Pipe : 3
Base Material: Copper
Fin Material : Aluminum
Rated Voltage : 12 V
Rated Current : 0.2 Amp
Fan Speed : 2,000 rpm ( default ) / 1,500 rpm ( low speed )
Noise Level : 2,000 rpm, 23dBA ( default)
1,500 rpm, 18dBA (with fan speed cable)
Bearing Type : EBR
Fan Life Expectancy : 30,000 hr
Compatible CPU :
Intel
®
Pentium
®
Extreme Edition Series
Intel
®
Pentium
®
D Processor Series
Intel
®
Pentium
®
4 Processor Series (LGA775)
Intel
®
Core
TM
2 Duo Processor Series
AMD AM2 Series
AMD Athlon
TM
FX Series
AMD Athlon
TM
64x2 Series
AMD Athlon
TM
64 Series
Features
5) Fan Speed control
Cable x 1
STEP 1 STEP 2
Installation of Fan Speed control Cable
If fan speed control is required,
please refer to Installation of
Fan Speed control Cable.
If fan speed control is required,
please refer to Installation of
Fan Speed control Cable.
Connect the 3-pin cooler connector to the white
connector of the fan speed control cable.
Connect the other side of the
cable to the CPU fan connector
located on the motherboard.
The original fan speed of 2000
rpm will than drop down to
1500 rpm.