SMEG SFP105 Manual

Download Manual  of Smeg SFP105 Monitor for Free or View it Online on All-Guides.com.

Brand: Smeg

Category: Monitor

Type: Manual 

Model: Smeg SFP105 , Smeg SFP105N

Pages: 26 (0.73 Mb)

Download Smeg SFP105 Manual 

Smeg SFP105 Manual  - Page 1
1
Smeg SFP105 Manual  - Page 2
2
Smeg SFP105 Manual  - Page 3
3
Smeg SFP105 Manual  - Page 4
4
Smeg SFP105 Manual  - Page 5
5
Smeg SFP105 Manual  - Page 6
6
Smeg SFP105 Manual  - Page 7
7
Smeg SFP105 Manual  - Page 8
8
Smeg SFP105 Manual  - Page 9
9
Smeg SFP105 Manual  - Page 10
10
Smeg SFP105 Manual  - Page 11
11
Smeg SFP105 Manual  - Page 12
12
Smeg SFP105 Manual  - Page 13
13
Smeg SFP105 Manual  - Page 14
14
Smeg SFP105 Manual  - Page 15
15
Smeg SFP105 Manual  - Page 16
16
Smeg SFP105 Manual  - Page 17
17
Smeg SFP105 Manual  - Page 18
18
Smeg SFP105 Manual  - Page 19
19
Smeg SFP105 Manual  - Page 20
20
Smeg SFP105 Manual  - Page 21
21
Smeg SFP105 Manual  - Page 22
22
Smeg SFP105 Manual  - Page 23
23
Smeg SFP105 Manual  - Page 24
24
Smeg SFP105 Manual  - Page 25
25
Smeg SFP105 Manual  - Page 26
26
Cleaning and maintenance
51
EN
6. Replace the cover correctly, so that the
moulded part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
What to do if...
The display is completely off:
• Check the mains power supply.
• Check whether an omnipolar switch
upstream of the appliance supply line is
in the “ON” position.
The appliance does not heat up:
• Check whether it has been set in
“showroom” mode (for further details see
“Secondary menu”).
The controls do not respond:
• Check whether it has been set in “child
lock” mode (for further details see
“Secondary menu”).
The cooking times are longer than those
indicated in the table:
• Check whether it has been set in “low
power” mode (for further details see
“Secondary menu”).
After the automatic cleaning cycle
(pyrolysis) it is not possible to select a
function:
• Verify whether the door locking device
has switched off. If it has not, the oven
has a protection device that does not
allow functions to be selected while the
door locking device is active. This is
because the temperature inside the oven
is still too high to permit any type of
cooking.
The display shows “ERR4”:
The door lock has not properly attached
to the door. This might be because the
door was accidentally opened during
the door lock activation. Switch off the
oven and switch it on again waiting a
few minutes before selecting a new
cleaning cycle.
If the door is opened during a fan-assisted
function, the fan stops:
This is not a fault. It is a normal operation
of the appliance, useful when cooking
foods in order to avoid excessive heat
escaping. When the door is closed, the
oven will return to normal operation.
If the problem has not been
resolved or in the case of other
types of fault, contact your local
technical support centre.