• Home
• Brands
• Smeg Manuals
• Smeg Refrigerator
• SMEG Refrigerator Instructions For The User

SMEG Refrigerator Instructions For The User

Download Instructions for the user of Smeg Refrigerator Other, Refrigerator for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

15

Before contacting the After-Sales Service:

Switch the appliance on again to see if the problem

has been solved. If it has not, unplug the appliance

and wait for about an hour before switching on

again.

If the appliance is still not working after you have

gone through all the checks listed in the

troubleshooting guide and switched it off then on

again, contact the After-Sales Service to explain the

problem and have the following information ready:

• the type of fault

• the model

• the type and serial number of the appliance

(given on the rating plate)

• the Service number (the number after the word

SERVICE on the rating plate inside the

appliance)

Note:

the door opening direction can be changed. If

this operation is performed by the After-Sales

Service it is not covered by the warranty.

AFTER-SALES SERVICE

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A

13amp fused plug, to change a fuse in this type of plug use an

A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and if the

fuse cover is lost the plug must not be used until a correct

replacement is fitted. Correct replacement are identified by the

colour insert or the colour embossed in words on the base of

the plug. Replacement fuse covers are available from your local electrical store.

For the Republic of Ireland only

The information given in respect of Great Britain will frequently apply, but a third type of plug and socket

is also used, the 2-pin, side earth type.

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please contact After-sales Service for further instruction.

Please do not attempt to change plug yourself. This procedure needs to be carried out by a qualified technician in

compliance with the manufactures instructions and current standard safety regulations.

ELECTRICAL CONNECTION FOR GREAT

BRITAIN AND IRELAND ONLY

Note: the upper shelf and the side supports cannot be removed.

To restore "Zero Degrees" box operation, make sure you replace the white plastic shelf underneath the

box before inserting the drawer and reactivating the function. To optimise energy consumption, we

recommend you deactivate the "Zero Degrees" box and remove it.

Clean the box and all its parts regularly, using a cloth and a solution of warm water and neutral detergent

specifically formulated for refrigerator interiors (take care not to immerse the white plastic shelf

underneath the box in water).

Before cleaning the box (including the outside), remove the drawer so as to disconnect the box

from the electricity supply.

Never use abrasive detergents.