SMEG KFV92 Instructions Manual

Download Instruction manual of Smeg KFV92 Ventilation Hood for Free or View it Online on All-Guides.com. This version of Smeg KFV92 Manual compatible with such list of devices, as: KFV92, KSE60X2, KSE90A2, KSE90X2, KSE91CX

Brand: Smeg

Category: Ventilation Hood

Type: Instruction manual

Model: Smeg KFV92 , Smeg KSE60X2 , Smeg KSE61CX , Smeg KSE90A2 , Smeg KSE90X2 , Smeg KSE91CX

Pages: 10 (0.52 Mb)

Download Smeg KFV92 Instruction manual

Smeg KFV92 Instruction manual - Page 1
1
Smeg KFV92 Instruction manual - Page 2
2
Smeg KFV92 Instruction manual - Page 3
3
Smeg KFV92 Instruction manual - Page 4
4
Smeg KFV92 Instruction manual - Page 5
5
Smeg KFV92 Instruction manual - Page 6
6
Smeg KFV92 Instruction manual - Page 7
7
Smeg KFV92 Instruction manual - Page 8
8
Smeg KFV92 Instruction manual - Page 9
9
Smeg KFV92 Instruction manual - Page 10
10
EN
1
14
Mounting the hood body
Before attaching the hood body, tighten the two screws Vr lo-
cated on the hood body mounting points.
Hook the hood body onto the screws 12a.
Fully tighten the support screws 12a.
Adjust the screws Vr to level the hood body.
12a
Vr
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 120 mm,
the choice of which is left to the installer.
To install a ø 120 mm air exhaust connection, insert the re-
ducer flange 9 on the hood body outlet.
Fix the pipe in position using sufficient pipe clamps (not sup-
plied).
Remove possible charcoal filters.
9
ø 120ø 150
RECIRCULATION VERSION AIR OUTLET
Insert the connection extension pieces laterally 14.1 in connec-
tion 15.
Insert the Connector 15 into the Support bracket 7.3 and fix it
with a screw.
Make sure that the outlet of the extension pieces 14.1 is hori-
zontally and vertically aligned with the chimney outlets.
Connect the air outlet connection 15 to the hood body outlet
using either a flexible or rigid pipe ø 150 mm, the choice of
which is left to the installer.
Ensure that the activated charcoal filters have been inserted.
ø 150
15
14.1
7.3