• Home
• Brands
• Sonance Manuals
• Sonance Impedance Matching System AF12
• Sonance Impedance Matching System AF12 Specifications

Sonance Impedance Matching System AF12 Specifications

Download Features & specifications manual of Sonance Impedance Matching System AF12 Amplifier for Free or View it Online on All-Guides.com.

1

www.sonance.com

Sonance • 212 Avenida Fabricante • San Clemente, CA 92672-7531 • (800) 582-7777 (949) 492-7777 • FAX (800) 538-5151 (949) 361-5151

©2007 Sonance, All rights reserved. 6.07

FEATURES & SPECIFICATIONS

AF12 IMEDANCE MATCHING SYSTEM

Features:

• Controls up to 12 sets of speakers, handles 200W RMS/channel (same as AF8)

• Easy to install with separate chassis box and mounting plate

A. Empty lightweight chassis provides ample space for a drill when installing in a stud bay

B. Sub-chassis easily slides into place using 4 screws and thermometer shaped holes

C. Cover plate extends beyond chassis to provide a clean, nished look

• Optional mounting capability for on-wall or in-wall installations when tight width

restrictions are required for structured wiring congurations

Specications:

Power Rating: 200 Watts RMS max input/channel, 350 Watts program max input/channel

Impedance Selector: 1/4” Push-em quick connectors

Terminal Type: Screwless quick connectors (14AWG - 18AWG)

Frequency Response: 20 – 20kHz ±1dB

Speaker Impedance: 6 – 8 ohms

Dimensions:

Chassis (WXHXD): 10.5” (267mm) x 14” (356mm) x 3.875” (98mm)

Sub-chassis (WXHXD): 8.2” (224 mm) x 12.5” (318mm) x 3.75” (94mm)

Coverplate (WXHXD): 12” (305mm) x 15.5” (394mm) x 0.3” (8mm)

Shipping Weight: 22.5 lbs (11.52 kg)

All specications subject to change without notice.

AF12

The AF12 Impedance Matching

System connects up to 12 pairs of

8-ohm speakers, and is specifically

designed for high-end audio distri-

bution. Three independent steel

assembly hardware components

(chassis, sub-chassis and cover

plate) and Screwless Quick Connec-

tors make for an easy and rapid

installation. This device has

optional mounting capabilities for

on-wall of in-wall installations,

making the AF12 an ideal solution

when tight width restrictions are

required for structured wiring

configurations.

Easily adjustable output taps can

be manually set to the proper

speaker system impedance load

(from 2/3-ohm to 4-ohm) and

support power levels from 50 to

200W RMS/channel to protect the

amplifier or receiver from

extremely low impedance loads.

The AF12 has separate left and

right ground paths for compatibil-

ity with all amps, even in bridged

mode. Heavy-duty printed circuit

boards with robust traces provide

reliable and safe operation. Termi-

nals accept up to 14-gauge wire.