Smeg SDR575XG5 Instructions For Use Manual

Download User manual manual of Smeg GCS70XG Cooktop for Free or View it Online on All-Guides.com. This version of Smeg GCS70XG Manual compatible with such list of devices, as: SR573X-5, SR876AGH5, SR876AGHO, SRV574X-3, SRV576CO5

Smeg GCS70XG User	manual	manual - Page 1
1
Smeg GCS70XG User	manual	manual - Page 2
2
Smeg GCS70XG User	manual	manual - Page 3
3
Smeg GCS70XG User	manual	manual - Page 4
4
Smeg GCS70XG User	manual	manual - Page 5
5
Smeg GCS70XG User	manual	manual - Page 6
6
Smeg GCS70XG User	manual	manual - Page 7
7
Smeg GCS70XG User	manual	manual - Page 8
8
Smeg GCS70XG User	manual	manual - Page 9
9
Smeg GCS70XG User	manual	manual - Page 10
10
Smeg GCS70XG User	manual	manual - Page 11
11
Smeg GCS70XG User	manual	manual - Page 12
12
Smeg GCS70XG User	manual	manual - Page 13
13
Smeg GCS70XG User	manual	manual - Page 14
14
Smeg GCS70XG User	manual	manual - Page 15
15
Smeg GCS70XG User	manual	manual - Page 16
16
Smeg GCS70XG User	manual	manual - Page 17
17
Smeg GCS70XG User	manual	manual - Page 18
18
Instructions for the installer
27
4 GAS CONNECTION
Connection to the gas mains may be made with a rigid copper pipe or
with a flexible pipe and conforming to the provisions defined by
standard regulations in force.
To facilitate connection, fitting A on the rear of the appliance may be
adjusted laterally. For this purpose, loosen hexagon nut B, turn fitting A
to the desired position, and retighten hexagon nut B (tightness is
ensured by a biconical brass ring). Use a soapy solution to check for
proper tightness. Never use a free flame. The hob has been inspected
for G20 (2H) natural gas at a pressure of 20 mbar. For use with other
types of gases, see Section “ ADAPTATION TO DIFFERENT TYPES
OF GAS”. The gas intake fitting is ½” gas external threaded (ISO 228-
1).
Connection with rigid copper pipe: the
connection to the gas mains must not
provoke stress of any kind on the hob.
Connection may be made by using biconical
adapter D with insertion of gasket C
(supplied).
Connection with flexible pipe: use only
flexible pipes conforming to standard
regulations in force, inserting gasket C
(supplied) between fitting A and flexible pipe
E.
The flexible pipe has to be installed so that pipe length does not
exceed 1.5 meters of maximum extension. Make sure that the pipes do
not touch any moving parts or become damaged.