Panasonic WJ-PB65E01 Operating Instructions Manual

Download Operating instructions manual of Panasonic WJ-PB65E01 Matrix Switcher for Free or View it Online on All-Guides.com.

Panasonic WJ-PB65E01 Operating instructions manual - Page 1
1
Panasonic WJ-PB65E01 Operating instructions manual - Page 2
2
Panasonic WJ-PB65E01 Operating instructions manual - Page 3
3
Panasonic WJ-PB65E01 Operating instructions manual - Page 4
4
Panasonic WJ-PB65E01 Operating instructions manual - Page 5
5
Panasonic WJ-PB65E01 Operating instructions manual - Page 6
6
Panasonic WJ-PB65E01 Operating instructions manual - Page 7
7
Panasonic WJ-PB65E01 Operating instructions manual - Page 8
8
Network Board
Operating Instructions
Model No. WJ-PB65E01
Video Output Board 1 Only
Nework OUT X-1
ALARM OUT 1
ALARM OUT 2
10/100 BASE-T
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Along with this document, refer to Central Processing Unit
WJ-MPU955A Operating Instructions for major operating
References
controls, their functions, and switch settings.
Preface
Network Board WJ-PB65E01 is designed for the connection
with Central Processing Unit WJ-MPU955A and system
expansion of Matrix Switcher WJ-SX650 Series.
Trademarks and Registered Trademarks
Microsoft and Windows are either registered trade-
marks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• Intel and Pentium are trademarks or registered trade-
marks of Intel Corporation or its subsidiaries in the
United States and other countries.
Other names of companies and products contained in
these operating instructions may be trademarks or reg-
istered trademarks of their respective owners.
CAUTION: These servicing instructions are for use by qual-
ified service personnel only. To reduce the risk of elec-
tric shock do not perform any servicing other than that
contained in the operating instructions unless you are
qualified to do so.
Do not attempt to disassemble the apparatus.
To prevent electric shock, do not remove screws or
covers.
There are no user-serviceable parts inside. Contact
qualified service personnel for maintenance.
Precautions
Do not strike or give a strong shock to the appara-
tus.
It may cause damage or allow water to enter the appa-
ratus.
Pay attention to static electricity
Make certain to keep boards inside the anti-static sack
until it is installed.
Put your hand on a metallic surface, other than the
boards to discharge static electricity before installation.
Do not touch components mounted on the boards
directly by hand.
Hold only both edges of the boards when installing.