• Home
• Brands
• Panasonic Manuals
• Panasonic WVCU650 - SYSTEM CONTROLLER ADDENDUM
• Panasonic WJ-SX150 Operating Procedures Manual

Panasonic WJ-SX150 Operating Procedures Manual

Download Addendum of Panasonic WVCU650 - SYSTEM CONTROLLER ADDENDUM Control Unit, DVR for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

This operation is skipped when the auto login is set to ON.

(Refer to the operating instructions of matrix switcher.)

1. Turn on the power switches of all system components.

The OPERATE indicator will light up.

2. To turn on the power of the system controller, connect

the AC adapter to the AC outlet.

The OPERATE indicator lights up and "Terminal Mode

No User" appears on the LCD.

BEFORE OPERATION

INSTALLATIONS AND CONNECTIONS

SETUP PROCEDURES (HARDWARE)

Note: This section describes the terminal mode. To operate

in the PS·Data mode, refer to the operating instructions.

Before starting the following procedures, all system compo-

nents must be turned on.

The following procedures are applicable when the system

controller is connected to the matrix switcher.

■ Operation Start (Login)

Note: When auto login is set to ON, operators can log into

the system without entering their passwords. (Refer to

p. 2 Operation Start (Auto Login).)

Terminal Mode

No User

Addendum for WV-CU950/650 and WJ-SX150 Series

(1) ADDENDUM FOR SYSTEM CONTROLLER WV-CU950/WV-CU650:

MATRIX SWITCHER WJ-SX150 SERIES

OPERATING PROCEDURES

The descriptions in this document are applicable when WJ-SX150A Administrator Console and the firmware of this unit (matrix

switcher) are Ver. 2.04 or later.

Note: Refer to the operating instructions of matrix switcher for how to check the version.

■ Basic System Connections

• The connection details are the same as System

Controller WV-CU360C/CJ. Refer to the operating

instructions of matrix switcher .

•

To connect System Controller WV-CU950 or WV-CU650

to Digital Disk Recorder WJ-HD300 Series or WJ-HD220

Series via the matrix switcher, refer to pp. 37 to 40.

■ MODE Switch Setting

Either of the terminal mode or PS·Data mode are applicable

for connections. Refer to WV-CU950/WV-CU650 Operating

Instructions for details on the switch setting for each mode.

■ CONTROLLER NO. Switch

Setting

Normally, set this switch to “1” (default position).