• Home
• Brands
• Ashly Manuals
• Ashly ne 8250
• Ashly NE4250 Specifications

Ashly NE4250 Specifications

Download Specifications of Ashly ne 8250 Amplifier, Computer Hardware for Free or View it Online on All-Guides.com. This version of Ashly ne 8250 Manual compatible with such list of devices, as: NE4250.25, NE4250.70, NE8250.70, ne 8250.10, Protea NE4250

1

2

Features:

• 10/100 Ethernet and RS-232 com-

puter interface Is standard

• Extensive DSP Available

• Easy and intuitive user interface

• Mic/Line inputs

• 24-bit A/D–D/A audio resolution

• 24-bit/150 MHz DSPs

• Up to 24 channels of audio processing

• 4x4 base unit configuration

• Expand inputs or outputs 4 channels

per module

• Modules easily field installable

• Euroblock connectors for audio,

preset recall, DC remote level

control and data in/out

• 31 preset locations

• Four dedicated remote controls

for Level, Preset Recall and Program

mable Functions

• Third Party Control Friendly

• Input and output metering viewable

in dBu

• Multi-level Security

• Five year worry-free warranty

• Safety/Compliance: (cTUVus, FCC,

CE pending), RoHS

Rear panel:

•10/100 Ethernet port

• RS-232 Port

• Euroblock inputs

• Euroblock outputs

• Remote level control

• Preset Recall

• Data in and out ports

NE Series specifications

Connecting and controlling an audio processor for networked systems has

now been simplified with Ashly’s NE-Series Protea ne24.24M digital signal

processor. This Network Enabled (NE) processor offers ease of use, setup and

control using standard 10/100 Ethernet protocol and Protea NE Software. No

special outboard control units are needed.

The ne24.24M Matrix Processor uses modular expansion cards to provide up

to twenty-four channels of audio matrixing and processing. The base unit of-

fers a four-input/four-output configuration. Each input and output expansion

card has an individual DSP processor allowing you to expand the base unit’s

total inputs or outputs four channels at a time. These cards are easily installed

in the field without the need to reprogram the device.

Matrixing allows you to route any input to any output and control individual

levels once they have been assigned. Fixed path architecture and extensive

processing power per channel will reduce the amount of time it takes to set

up your system. All programming is accomplished using Ashly’s Protea NE

Software on a PC platform. No front panel controls and multi-level software

security assures you a tamperproof audio system. Input channel processing

blocks include Mic Preamp with Phantom Power, Gain, Delay, fifteen EQ

Filters, Gate, Autoleveler and Ducker. Inputs may be configured as either mic

or line level. Output channel processing blocks consist of a Cross Point Mixer,

HPF/LPF, Delay, fifteen EQ Filters, Gain and Limiter. The cross point mixer in the

output section allows you to route any input to any output at any level and

mute any input at any output without affecting the true input configuration.

The HPF/LPF block offers Bessel, Butterworth and Linkwitz-Riley filters with 12,

18, 24 and 48dB/octave slopes.

Whether you are designing or installing a system for corporate boardrooms,

restaurants, courtrooms, houses of worship, left/center/right theatres, audi-

toriums or conference centers, the Protea ne24.24M will more than satisfy

your requirements for any zoned system requiring input/output matrixing with

signal processing.

NE Series

Signal Processors

Protea ne24.24M Matrix Processor|

Accessories

Four Channel Input Module

Four Channel Output Module

WR-1 2-ch Level Control

WR-2 Four Position Switch

WR-5 Programmable Selector

RD/RW8 8-ch Level Control

Preliminary Data 03/08