Ashly sra2075 Specifications
Download Specification sheet of Ashly SRA-2075 Amplifier for Free or View it Online on All-Guides.com. This version of Ashly SRA-2075 Manual compatible with such list of devices, as: SRA-2075, SRA-2150, SRA-4075, SRA-4150
Brand: Ashly
Category: Amplifier
Type: Specification sheet
Model: Ashly SRA-2075 , Ashly SRA-2150 , Ashly SRA-4075 , Ashly SRA-4150
Pages: 2 (0.49 Mb)
1
2
Specifying the right power amp is oen easier than
nding it. Our SRA Series makes it a snap to get exactly
what you need.
SRAs are advanced, ecient ampliers perfect for
installaons with modest power requirements. Housed
in a compact single rack space chassis, and weighing
only 10lbs, they're designed to drive 4 or 8 Ohm loads.
Choose from 4 models available in 2 and 4-channel
conguraons with power rangs of 75W and 150W
per channel into 4 Ohms. The 150W models are
capable of driving 25V constant voltage lines directly.
Switch mode power supplies and Class-D amplier
circuitry provide an extremely power ecient soluon.
They are convecon cooled, so lile maintenance is
needed aer the installaon, and no annoying fan
noise. Of course you get the reliability, superior sonic
quality and rugged construcon you’ve come to
expect from Ashly.
SRA Features:
• Convecon cooling
• Extremely low noise
• Extensive protecon circuitry
• Level aenuators for each channel
• Signal present and clip alert status LEDs
• Selectable input sensivity
• Defeatable 80Hz HPF
• Euroblock inputs/outputs
• Stereo or bridged mode switch per channel pair
• Remote stand-by control
• Adjustable turn-on delay up to 8 seconds
• Stereo headphone jack (on 2-channel models)
• Safety/Compliance:
TUV
, CE, FCC, RoHS
Notes: 0dBu = 0.775 VRMS
Frequency Response
(8 Ohms)
20Hz–20kHz, ±1.0dB
Distoron (SMPTE, typical)
< 0.5% - 8 Ohm load, 10dB below
rated power
Distoron (THD-N, typical)
< 0.5% - 8 Ohm load, 10dB below
rated power, 20Hz–20kHz
Damping Factor
(8 Ohm load, < 1 kHz)
> 200 into 8 Ohms
Input Impedance 20k Ohms, Balanced
Input Sensivity 1dBu (75W), 4dBu (150W)
Gain 26dBu, 36dBu, Selectable
Maximum Input Level +21dBu
HPF 80Hz 2
nd
Order, defeatable
Cooling Convecon
Output Circuitry Class D
Amplifier/Load Protection
Output Overcurent, DC Output,
Main Supply Rail Overvoltage,
Chassis Temperature, Inrush
Liming, Mains Fuse
Environmental 40-120° F, (4-49° C) noncon-
densing
Front Panel
Controls AC Power Switch, Level
Indicators (LED color)
Power (Blue), Standby (Yellow),
Protect (Red), Signal (Green),
Clip (Red)
Rear Panel
Controls
80Hz HPF, Gain/Sensivity: +26dB,
+36dB, Bridge/Stereo Switch,
Remote Standby, Delay
Connectors (each channel)
Input: 3-Pin Euroblock
Output: Euroblock
Cordset 3-Prong IEC
SRA SERIES
Standard Power amPlifierS
2075 4075 2150 4150
Channels 2 4 2 4
Max Output Power: Per Channel, 20Hz–20KHz, 1% THD All Channels Driven
4 Ohms 75W 75W 150W 150W
8 Ohms 40W 40W 80W 80W
8 Ohms (Bridged) 150W 150W 300W 300W
Line Current Draw: All Channels Driven @ 4 Ohms
Standby Mode 37mA 39mA 89mA 102mA
No Signal 320mA 565mA 370mA 660mA
Typical (1/8 power pink noise) 0.70A 1.25A 1.10A 1.95A
Max (1/3 power pink noise) 1.23A 2.25A 2.10A 3.80A
Thermal Dissipaon: BTU/hr, All Channels Driven @ 4 Ohms
Standby Mode 13 15 14 23
No Signal 61 113 72 137
Typical (1/8 power pink noise) 73 145 111 211
Max (1/3 power pink noise) 85 150 126 263
Signal to Noise
20Hz–20kHz, unweighted
>100dB
>100dB >103dB >103dB
©2014 All features, specifications and graphical represen-
tations are subject to change without notice. Ashly Audio
is a division of Jam Industries, Ltd. DS-1 1213
Sra2075
Sra2150
Sra4075
Sra4150
5-Year Warranty
Hand-built in
Webster, NY
Dimensions
19”W x 1.75"H x 11”D (483mm x 45.5mm x 279.4mm)
Unit Weight
2075: 8.75lbs (3.97kg) 2150: 8.83lbs (4kg)
4075: 9.4lbs (4.27kg) 4150: 9.48lbs (4.3kg)
Shipping Weight 2075/2150: 15lbs (7kg) 4075/4150: 16lbs (8kg)
Power Req. 120VAC, 240VAC ±10%, 50/60Hz (factory set)
|
|
|