Chip RC Networks
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
GND GND
GND
GND
Discrete Chips
Discrete Chips
Chip RC Network
(EZACT, EZADT, EZAST/SS, EZANT)
Chip RC Network
(EZACT, EZADT, EZAST/SS, EZANT)
Chip RC Network
(EZASTB/SSB)
Chip RC Network
(EZASTB/SSB)
I/O I/O
I/O I/O
I/O I/O
I/O I/O
I/O I/O
I/O I/O
Chip RC Networks
Type:
EZACT
EZADT
EZAST/SS
EZANT
Type:
EZASTB/SSB
■ Features
Smallest SMD R/C networks
● 4 popular noise reduction circuits made
EZACT : 2.0 mm ҂ 1.2 mm ҂ 0.6 mm, 0.5 mm pitch (Flat terminal type)
EZADT : 3.2 mm ҂ 1.6 mm ҂ 0.65 mm, 0.635 mm pitch (Concave terminal type)
EZAST/SS : 4.0 mm ҂ 2.1 mm ҂ 0.65 mm, 0.8 mm pitch (Concave terminal type)
EZASTB/SSB : 4.0 mm ҂ 2.1 mm ҂ 0.65 mm, 0.65 mm pitch (Convex terminal type)
EZANT : 6.4 mm ҂ 3.1 mm ҂ 0.80 mm, 1.27 mm pitch (Concave terminal type)
● Takes up less space than discrete chip resistor & chip capacitor
EZACT:25 % of 0402 inches (1.0 mm ҂ 0.5 mm) chips placing area
EZADT:50 % of 0402 inches (1.0 mm ҂ 0.5 mm) chips placing area
EZAST/SS, EZASTB/SSB:70 % of 0402 inches (1.0 mm ҂ 0.5 mm) chips placing area
EZANT:55 % of 0805 inches (2.0 mm ҂ 1.2 mm) chips placing area
RC Low pass fi lter AC Terminator
<Effect of high density placing, PWB space saving>
■ Recommended Applications
● Digital equipment such as PCs, printers, HDD, PCMCIA cards, PDAs, and word processors
● Communication equipment, digital cordless phones, automobile phones, GSM, PHS, DECT
● Digital audio and video equipment
● Electronic musical instruments, and other digital devices
Feb. 2006
