Haier 001050 Operation Manual

Download Operation manual of Haier 001050 Air Conditioner for Free or View it Online on All-Guides.com. This version of Haier 001050 Manual compatible with such list of devices, as: 001050, 1050, HSU-09LH13, HSU-09LH13 - annexe 1, HSU-12LH13 - annexe 1

Haier 001050 Operation manual - Page 1
1
Haier 001050 Operation manual - Page 2
2
Haier 001050 Operation manual - Page 3
3
Haier 001050 Operation manual - Page 4
4
Haier 001050 Operation manual - Page 5
5
Haier 001050 Operation manual - Page 6
6
Haier 001050 Operation manual - Page 7
7
Haier 001050 Operation manual - Page 8
8
Haier 001050 Operation manual - Page 9
9
Haier 001050 Operation manual - Page 10
10
Haier 001050 Operation manual - Page 11
11
Haier 001050 Operation manual - Page 12
12
Haier 001050 Operation manual - Page 13
13
Haier 001050 Operation manual - Page 14
14
Haier 001050 Operation manual - Page 15
15
Haier 001050 Operation manual - Page 16
16
Haier 001050 Operation manual - Page 17
17
Haier 001050 Operation manual - Page 18
18
Haier 001050 Operation manual - Page 19
19
Haier 001050 Operation manual - Page 20
20
Haier 001050 Operation manual - Page 21
21
Haier 001050 Operation manual - Page 22
22
Haier 001050 Operation manual - Page 23
23
Haier 001050 Operation manual - Page 24
24
Operation
19
When the remote controller is manipulated, it gets the system back to the
normal operation mode.
Emergency and Test Operation
When machine is running in emergency, the set value of temperature and wind
speed couldn't be altered; meanwhile, it can't operate for dehumidifying or under
timing mode.
Emergency operation:
Use this operation only when the remote controller
is defective or lost.
When the emergency operation switch is
pressed,the" Pi "sound is heard once, which means
the start of this operation.
In this operation, the system automatically selects
the operation modes, cooling or heating, according
to the room temperature.
Test operation:
Test operation switch is the same as emergency switch.
Use this switch in the test operation when the room
temperature is below 16
O
C, do not use it in the normal
operation.
Continue to press the test operation switch for more
than 5 seconds. After you hear the "Pi" sound twice,
release your finger from the switch: the cooling operation
starts with the air flow speed "Hi".
Removal of the restriction of emergency or test operation
Press the emergency operation switch once more, or manipulate through the
remote controller; the "Pi" sound, the emergency or test operation is terminated.