Perlick Keg Couplers Tapping Equipment Owner's Manual
Download Datasheet of Perlick Keg Couplers Tapping Equipment Beverage Dispenser for Free or View it Online on All-Guides.com.
Brand: Perlick
Category: Beverage Dispenser
Type: Datasheet for Perlick Keg Couplers Tapping Equipment
Pages: 3 (0.18 Mb)
1
2
3
Retrofit Empty Keg Sensor
Existing Perlick single valve keg couplers can be retrofitted
to function as Smart Couplers. Simply replace the probe
with Perlick’s No. 40125 empty keg sensor. Bulk-packed.
Weight: 8 oz. each
Part No. Description
40125...................................For domestic kegs
40119 ...................................For imported kegs
Cleaning Adapters
Single and dual cleaning
adapters are uniquely
designed to operate
when Perlick’s keg cou-
pler is in the untapped
(handle up) position,
allowing the system to be cleaned from the faucet through
the keg coupler. Prevents solution from entering the CO
2
line, eliminating beer contamination when retaping. Brass
nickel plated (Bulk Packed)
Part No. Description
43657* .................................Single/domestic kegs
43681* .................................Dual/domestic kegs
43659* .................................Series/domestic kegs
43699...................................Single/imported kegs
43702...................................Dual/imported kegs
*Note: These adapters are designed to be used with all Perlick single
valve couplers and most competitor’s couplers. Must be used with Smart
Couplers when cleaning lines from the faucet through the Smart Coupler.
Lo-Boy Coupler for Single
Valve Domestic Kegs
Uniquely constructed to tap a keg
in limited space. Just push down
and twist to tap.
Part No. Description
40030 ............................Lo-Bo
KEG COUPLERS
Perlick Smart Couplers
✓ Keeps beer loss to a minimum
✓ Speeds service on keg changeovers
✓ Minimizes overfoaming
The patented Perlick Smart Coupler* combines an integral
Empty Keg Sensor with a quality keg coupler to eliminate
the need for wall-mounted FOB devices. It senses when a
keg is empty and shuts off the beer flow, yet leaves the line
fully charged with beer. This prevents gas from entering an
empty line causing excessive foaming when tapping a
fresh keg. Packed 25 per case. Weight: 1 lb. 8 oz. each
Part No. Description
26000F* ...............................For Domestic Kegs
27500F.................................For Imported Kegs
*U.S. Patent #5,630, 441
Universal Empty Keg Sensor
Controls the amount of beer loss by closing off the beer
flow when a keg empties. Mounts directly to the keg
coupler for dual probe or imported kegs.
Part No. Description
43739...................................Universal empty
keg sensor
No. 26000F
No. 43739
No. 43657 No. 43681 No. 43659
Single Dual Series
Adapter Adapter Adapter