Sony AIR-SW10TI - Wireless Audio Transmitter Component Manual

Download Manual  of Sony AIR-SW10TI - Wireless Audio Transmitter Component Other, Stereo System for Free or View it Online on All-Guides.com.

Sony AIR-SW10TI - Wireless Audio Transmitter Component Manual  - Page 1
1
Sony AIR-SW10TI - Wireless Audio Transmitter Component Manual  - Page 2
2
AIR-SW10Ti (GB/ES) 4-152-274-11(1)
©2009 Sony Corporation Printed in China
4-152-274-11(1)
English
To stabilize S-AIR reception
Read the following when S-AIR reception is poor or unstable.
To use S-AIR products (S-AIR main unit, subwoofer, and the optional
sub unit)
Before using S-AIR products, have the following ready.
Confirm the wireless transceivers are inserted
correctly.
Insert the wireless transceivers firmly to the depth
into the slots of the S-AIR main unit, subwoofer,
and the optional sub unit, respectively.
Confirm that the S-AIR IDs of the S-AIR main
unit, subwoofer, and the optional sub unit are
the same.
The default setting of the S-AIR IDs of the S-AIR
main unit, subwoofer, and the optional sub unit is A.
Depending on the S-AIR product, you can set the
S-AIR ID by the switch or the setup menu.
For details, refer to the operating instructions of
each S-AIR product.
About environments where S-AIR products (S-AIR main unit,
subwoofer, and the optional sub unit) are used
S-AIR products use a radio frequency of 2.4 GHz. Certain electronic equipment or other factors may
cause lost connection or instability in S-AIR reception.
Electronic equipment influence
The following may cause interference or cross talk.
Cellular phones, cordless phones
Wireless LAN, personal computers
Game machines using radio signals
Microwave ovens
Other factors
The following may cause poor reception.
Materials or structures, such as walls and floors
The location where an S-AIR product is placed
When using S-AIR products, place them as far as possible from the above electronic equipment, or
place where S-AIR reception is stable.
When S-AIR reception is poor
Check the following.
Keep cords that are connected to the S-AIR product (power cord, antennas or other cords) away from
the wireless transceiver and slot.
Keep as much space as possible around S-AIR products.
Avoid placing S-AIR products on top of, or directly below, other electronic equipment.
Avoid placing S-AIR products in a closed rack, metal rack, or under a table.
Adjust the location (height, orientation, and place in the room) of S-AIR products until reception is
the most stable.
Place so that the wireless transceivers of the S-AIR main unit, subwoofer, and the optional sub unit are
closer.
Place so that S-AIR products are separated from other wireless devices.
Place so that S-AIR products are separated from metal doors or tables.
If you cannot improve S-AIR reception, change the “RF CHANGE” setting. For details, refer to the
operating instructions of each S-AIR product.
Same S-AIR ID
A
S-AIR ID
B
C
T
U
N
I
N
G
T
U
N
E
R
i
P
o
d
V
O
L
U
M
E
S
T
A
N
D
B
Y
Insert firmly
AIR-SW10Ti