Hatco C-12 Specifications

Download Specifications of Hatco C-12 Heater, Water Heater for Free or View it Online on All-Guides.com. This version of Hatco C-12 Manual compatible with such list of devices, as: C-15, C-18, C-30, C-45, C-7

Hatco C-12 Specifications - Page 1
1
Hatco C-12 Specifications - Page 2
2
ITEM#
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607 • (414) 671-6350 • Fax (800) 543-7521 • Int’l. Fax (414) 671-3976
www
.hatcocorp.com • E-mail: [email protected]
For
m No. C-1006(S)
Printed in U.S.A.
COMPACT
ELECTRIC BOOSTER WATER HEATERS
Models C-4, -5, -6, -7, -9, -12, -13, -15, -17, -18, -24, -27, -30, -36, -39, -45, -54, -57
The Hatco Compact Electric Booster
Water Heater provides all the 180°F (82°C)
final rinse water required to sanitize and
flash-dry dishes and flatware.
FLEXIBILITY
The space saving Compact is easy to
install next to the dishwasher with slide
brackets or on 6" (152 mm) legs. The
storage capacity is 6 gallons (23 liters).
QUALITY
The following features assure the finest
performance for years to come:
• All models include a Castone
®
lined
tank with a 10-year limited warranty.
Features include a temperature/pressure
relief valve, a pressure reducing valve,
two temperature/pressure gauges, a
high-temperature limit control, pilot
indicator light, on-off switch, and a
low-water cut-off to prevent element
burnout due to a low water condition.
• Available with slide brackets for
mounting under a dishtable.
• Each booster has fiberglass insulation
to minimize heat loss.
Hatco electric booster heaters are
factory pre-plumbed and pre-wired
with calibrated immersion thermostat
and high-temperature limit switch.
• A stainless steel front panel and
powder-coated silver-gray hammertone
body is standard on all Compact
models.
• Swing-away front panels with
low-water cut-off, control fuses
and transformer allow quick access
to probes and elements for easier
ser
viceability.
Model C-18 on
6" (152 mm) legs
Model C-24 on
6" (152 mm) legs
Compact Model 40°F (22°C) Rise 70°F (39°C) Rise
C-4 40 gph ( 151 Iph) 23 gph ( 87 Iph)
C-5 50 gph ( 189 Iph) 29 gph ( 110 Iph)
C-6 60 gph ( 227 Iph) 34 gph ( 129 Iph)
C-7
70 gph (
265 Iph)
40 gph (
151 Iph)
C-9
90 gph ( 341 Iph) 52 gph ( 197 Iph)
C-12
120 gph (
454 Iph)
69 gph (
261 Iph)
C-13 135 gph ( 511 Iph) 77 gph ( 292 Iph)
C-15 151 gph ( 572 Iph) 86 gph ( 326 Iph)
C-17
173 gph (
655 Iph) 99 gph ( 375 Iph)
C-18 181 gph ( 685 Iph) 103 gph ( 390 Iph)
C-24 241 gph ( 912 Iph) 138 gph ( 522 Iph)
C-27 271 gph (1026 Iph) 155 gph ( 587 Iph)
C-30 301 gph (1139 Iph) 172 gph ( 651 Iph)
C-36 361 gph (1367 Iph) 206 gph ( 780 Iph)
C-39 391 gph (1480 Iph) 224 gph ( 848 Iph)
C-45 452 gph (1711 Iph) 258 gph ( 977 Iph)
C-54 542 gph (2052 Iph) 310 gph (1174 Iph)
C-57 573 gph (2169 Iph) 326 gph (1234 Iph)
Water Temperature Recovery Table
WATER QUALITY REQUIREMENTS
Incoming water in excess of 3.0 grains of har
dness per gallon (GPG) (.75 grains of
har
dness per liter) must be tr
eated and softened befor
e being supplied to booster
heater(s). Water containing over 3.0 GPG (.75 GPL) will decrease the efficiency
and reduce the operating life of the unit.
Note: Product failure caused by liming or sediment buildup is not covered
under warranty.