Hatco S-12 Specifications
Download Specifications of Hatco S-12 Heater, Water Heater for Free or View it Online on All-Guides.com. This version of Hatco S-12 Manual compatible with such list of devices, as: S-15, S-17, S-18, S-30, S-36
Brand: Hatco
Category: Heater , Water Heater
Type: Specifications
Model: Hatco S-12 , Hatco S-13 , Hatco S-15 , Hatco S-17 , Hatco S-18 , Hatco S-24 , Hatco S-27 , Hatco S-30 , Hatco S-36 , Hatco S-39 , Hatco S-40 , Hatco S-45 , Hatco S-54 , Hatco S-57
Pages: 2 (0.83 Mb)
1
2
ITEM#
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607 • (414) 671-6350 • Fax (800) 543-7521 • Int’l. Fax (414) 671-3976
www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. S Spec Sheet
Printed in U.S.A.
January 2007
IMPERIAL
E
LECTRIC BOOSTER WATER HEATERS
Models S-6, -7, -9, -12, -13, -15, -17, -18, -24, -27, -30, -36, -39, -40, -45, -54, -57
The Hatco Imperial Electric Booster Water
Heater combines quality construction and
rugged dependability to provide up to
573 GPH (2169 LPH) of sanitizing rinse
water. Dishes and flatware air-dry instantly
to save time, space, and money. Storage
capacity is 16 gallons (60 liters).
FLEXIBILITY
Models available from 6kW to 57kW
in 208, 240, and 480 volts with other
voltages available. The Imperial Electric
Booster Heater thermostats can be
lowered to a 140°F (60°C) setting for
low-temp dishmachines.
Service area is accessible from the front
to permit easy installation, even next to
other equipment.
QUALITY
The following features assure the finest
performance for years to come:
• All models include a Castone
®
lined
tank with a 10-year limited warranty.
•
Features include a temperature/pressure
relief valve, a pressure reducing valve,
two temperature/pressure gauges, a
high-temperature limit control, pilot
indicator light, on-off switch, and a
low-water cut-off to prevent element
burnout due to low water condition.
• Each booster has a built-in heat trap
and fiberglass insulation to minimize
heat loss.
• Hatco electric booster heaters are
factory pre-plumbed and pre-wired with
calibrated immersion thermostats and
high-temperature limit switch.
•
A stainless steel front panel and powder-
coated silver-gray hammertone body is
standard on all Imperial models.
Model S-54
Imperial Model 40°F (22°C) Rise 70°F (39°C) Rise
S-6 60 gph ( 227 Iph) 34 gph ( 129 Iph)
S-7 70 gph ( 265 Iph) 40 gph ( 151 Iph)
S-9 90 gph ( 341 Iph) 52 gph ( 197 Iph)
S-12 120 gph ( 454 Iph) 69 gph ( 261 Iph)
S-13 135 gph ( 511 Iph) 77 gph ( 292 Iph)
S-15 151 gph ( 572 Iph) 86 gph ( 326 Iph)
S-17 173 gph ( 655 Iph) 99 gph ( 375 Iph)
S-18 181 gph ( 685 Iph) 103 gph ( 390 Iph)
S-24 241 gph ( 912 Iph) 138 gph ( 522 Iph)
S-27 271 gph (1026 Iph) 155 gph ( 587 Iph)
S-30 301 gph (1139 Iph) 172 gph ( 651 Iph)
S-36 361 gph (1367 Iph) 206 gph ( 780 Iph)
S-39 391 gph (1480 Iph) 224 gph ( 848 Iph)
S-40 407 gph (1541 Iph) 232 gph ( 878 Iph)
S-45 452 gph (1711 Iph) 258 gph ( 977 Iph)
S-54 542 gph (2052 Iph) 310 gph (1174 Iph)
S-57 573 gph (2169 Iph) 326 gph (1234 Iph)
On-off
toggle
switch
Factory
pre-set
thermostats
High-temp
limit safety
Over current
c
ircuit
p
rotection
when
required
Front cover
f
or easy
access
Low-water
c
ut-off
prevents
element
b
urnout
Power
connection
through
enclosed
panel
C
astone
®
l
ined tank
w
ith 10-year
warranty –
non-toxic and
non-corrosive
Metal
sheathed
heating
e
lements
Fiberglass
i
nsulation to
m
inimize
heat loss
Pilot
light
Water Temperature Recovery Table
WATER QUALITY REQUIREMENTS
Incoming water in excess of 3.0 grains of hardness per gallon (GPG) (.75 grains of
hardness per liter) must be treated and softened before being supplied to booster
heater(s). Water containing over 3.0 GPG (.75 GPL) will decrease the efficiency
and reduce the operating life of the unit.
Note: Product failure caused by liming or sediment buildup is not covered
under warranty.