HealthRider H 900i User's Manual

Download Operation & user’s manual of Healthrider H 900i Other for Free or View it Online on All-Guides.com.

Brand: Healthrider

Category: Other

Type: Operation & user’s manual for Healthrider H 900i

Pages: 26 (1.83 Mb)

Download Healthrider H 900i Operation & user’s manual

Healthrider H 900i Operation & user’s manual - Page 1
1
Healthrider H 900i Operation & user’s manual - Page 2
2
Healthrider H 900i Operation & user’s manual - Page 3
3
Healthrider H 900i Operation & user’s manual - Page 4
4
Healthrider H 900i Operation & user’s manual - Page 5
5
Healthrider H 900i Operation & user’s manual - Page 6
6
Healthrider H 900i Operation & user’s manual - Page 7
7
Healthrider H 900i Operation & user’s manual - Page 8
8
Healthrider H 900i Operation & user’s manual - Page 9
9
Healthrider H 900i Operation & user’s manual - Page 10
10
Healthrider H 900i Operation & user’s manual - Page 11
11
Healthrider H 900i Operation & user’s manual - Page 12
12
Healthrider H 900i Operation & user’s manual - Page 13
13
Healthrider H 900i Operation & user’s manual - Page 14
14
Healthrider H 900i Operation & user’s manual - Page 15
15
Healthrider H 900i Operation & user’s manual - Page 16
16
Healthrider H 900i Operation & user’s manual - Page 17
17
Healthrider H 900i Operation & user’s manual - Page 18
18
Healthrider H 900i Operation & user’s manual - Page 19
19
Healthrider H 900i Operation & user’s manual - Page 20
20
Healthrider H 900i Operation & user’s manual - Page 21
21
Healthrider H 900i Operation & user’s manual - Page 22
22
Healthrider H 900i Operation & user’s manual - Page 23
23
Healthrider H 900i Operation & user’s manual - Page 24
24
Healthrider H 900i Operation & user’s manual - Page 25
25
Healthrider H 900i Operation & user’s manual - Page 26
26
20
With the help of a second person, carefully raise the
Uprights (84) to the position shown. Carefully pivot the
H
ood (41) off.
L
ocate the Reed Switch (63) and the Magnet (46) on
the left side of the Pulley (47). Turn the Pulley until the
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 3 mm.
If necessary, loosen the
Screw (3), move the Reed Switch slightly, and then
retighten the Screw. Reattach the Hood, and run the
treadmill for a few minutes to check for a correct speed
reading.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9.
b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and
UNPLUG THE
POWER CORD. Using the allen wrench, turn both
rear roller bolts counterclockwise, 1/4 of a turn. When
the walking belt is properly tightened, you should be
able to lift each edge of the walking belt 5 to 7 cm off
the walking platform. Be careful to keep the walking
belt centered. Then, plug in the power cord, insert the
key, and run the treadmill for a few minutes. Repeat
until the walking belt is properly tightened.
c. If the walking belt still slows when walked on, please call the telephone number on the warranty
card accompanying this manual.
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center, first remove the key
and UNPLUG THE POWER CORD. If the walking
belt has shifted to the left,
use the allen wrench to
turn the left rear roller bolt clockwise 1/2 of a turn; if
the walking belt has shifted to the right, turn the
left bolt counterclockwise 1/2 of a turn. Be careful not
to overtighten the walking belt. Then, plug in the
power cord, insert the key, and run the treadmill for a
few minutes. Repeat until the walking belt is centered.
b.
If the walking belt slips when walked on, first re-
move the key and
UNPLUG THE POWER CORD.
Using the allen wrench, turn both rear roller bolts
clockwise, 1/4 of a turn. When the walking belt is cor-
rectly tightened, you should be able to lift each edge
of the walking belt 5 to 7 cm off the walking platform.
Be careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and carefully
walk on the treadmill for a few minutes. Repeat until
the walking belt is properly tightened
.
b
a
Rear Roller Bolts
5–7 cm
b
46
3
63
Top
View
47
41
84
3mm