• Home
• Brands
• Healthrider Manuals
• Healthrider Hotel Fitness It9800 Treadmill
• HealthRider Hotel Fitness It9800 Treadmill User's Manual

HealthRider Hotel Fitness It9800 Treadmill User's Manual

Download Operation & user’s manual of Healthrider Hotel Fitness It9800 Treadmill Other for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

14

OPERATION AND ADJUSTMENT

HOW TO CONNECT THE POWER CORD

Use a Surge Suppressor

Your incline trainer, like other electronic equipment,

can be damaged by sudden voltage changes in your

home’s power. Voltage surges, spikes, and noise

interference can result from weather conditions or from

other appliances being turned on or off. To decrease

the risk of damaging the incline trainer, always

use a surge suppressor with the incline trainer. To

purchase a surge suppressor, see precaution 13 on

page 3.

Use only a surge suppressor that is UL 1449 listed as a

transient voltage surge suppressor (TVSS). The surge

suppressor must have a UL suppressed voltage rating

of 400 volts or less and a minimum surge dissipation of

450 joules. The surge suppressor must also be electri-

cally rated for 120 volts AC and 15 amps. There must

be a monitoring light on the surge suppressor to indi-

cate whether it is functioning properly. Failure to use a

properly functioning surge suppressor could result

in damage to the control system of the incline

trainer and serious injury to users.

Plug in the Power Cord

The incline trainer must be grounded. If it should

malfunction or break down, grounding provides a path

of least resistance for electric current to reduce the risk

of electric shock. The incline trainer power cord has a

plug with a grounding pin (see drawing 1 on this page).

Plug the power cord into a surge suppressor, and plug

the surge suppressor into an appropriate outlet that is

properly installed and grounded in accordance with all

local codes and ordinances. The outlet must be on a

nominal 120-volt circuit capable of carrying 15 or

more amps. To avoid overloading the circuit, do

not plug other electrical devices, except for low-

power devices such as cell phone chargers, into

the surge suppressor or into an outlet on the same

circuit. IMPORTANT: The incline trainer is not com-

patible with GFCI-equipped outlets and may not be

compatible with AFCI-equipped outlets.

A temporary

adapter may

be used to

connect the

surge sup-

pressor to

a 2-pole

receptacle

if a properly

grounded

outlet is not

available.

The lug or wire extending from the adapter must

be connected with a metal screw to a permanent

ground such as a properly grounded outlet box cover.

Some 2-pole receptacle outlet box covers are not

grounded. Before using an adapter, contact a quali-

fied electrician to determine whether the outlet box

cover is grounded. The temporary adapter should

be used only until a properly grounded outlet can

be installed by a qualified electrician.

DANGER: Improper connec-

tion of the power cord increases the risk of

electric shock. Do not modify the plug—if

it will not fit an outlet, have a proper outlet

installed by a qualified electrician. If you are

unsure whether the incline trainer is properly

grounded, contact a qualified electrician.

1

Surge

Suppressor

Grounding Pin

Grounded Outlet

2

Adapter

2-pole Receptacle

Lug

Grounding Pin

Metal

Screw