Heath Zenith SL-5514 Owner's Manual

Download Owner's manual of Heath Zenith SL-5514 Home Safety Product for Free or View it Online on All-Guides.com.

Brand: Heath Zenith

Category: Home Safety Product

Type: Owner's manual for Heath Zenith SL-5514

Pages: 12 (0.6 Mb)

Download Heath Zenith SL-5514 Owner's manual

Heath Zenith SL-5514 Owner's manual - Page 1
1
Heath Zenith SL-5514 Owner's manual - Page 2
2
Heath Zenith SL-5514 Owner's manual - Page 3
3
Heath Zenith SL-5514 Owner's manual - Page 4
4
Heath Zenith SL-5514 Owner's manual - Page 5
5
Heath Zenith SL-5514 Owner's manual - Page 6
6
Heath Zenith SL-5514 Owner's manual - Page 7
7
Heath Zenith SL-5514 Owner's manual - Page 8
8
Heath Zenith SL-5514 Owner's manual - Page 9
9
Heath Zenith SL-5514 Owner's manual - Page 10
10
Heath Zenith SL-5514 Owner's manual - Page 11
11
Heath Zenith SL-5514 Owner's manual - Page 12
12
© 2007 HeathCo LLC 595-5730-05
Twin Halogen Motion
Sensing Light Control
Model SL-5514
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight
hours.
Requirements
The light control requires 120-volts AC.
If you want to use Manual Mode, the control must
be wired through a switch.
Some codes require installation by a qualified
electrician.
This product is intended for use with the enclosed
gasket and with a junction box marked for use in
wet locations.
Cover Plate
Light Control
Sensor
3 Wire
Connectors
Gasket
6 Mounting
Screws (3 sizes)
Mounting Bolt
Mounting Strap
Rubber Plug
Plastic Hanger
2 Halogen Bulbs
This package includes:
OPERATION
* resets to Auto Mode at dawn.
Note: When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
MANUAL MODE
ON-TIME
10 5 1 TEST
10 5 1 TEST
ON-TIME
TEST
... back on.
AUTO
1 Second
OFF then...
Put the ON-TIME switch in the 1, 5,
or 10 minute position.
Put the ON-TIME switch on the bottom
of the sensor in the TEST position.
Manual mode only works at night
because daylight returns the sensor
to AUTO.
Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
Move ON-TIME Switch to
1, 5, or 10 minutes
Mode Switching Summary
Flip light switch off
for one second then
back on*
MANUAL MODE
AUTO
TEST
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
Mode: On-Time Works: Day Night
Test
5 Seconds x x
Auto
1, 5, or 10 Min x
Manual
Until Dawn* x