• Home
• Brands
• HP Manuals
• HP 166207-B21 - Smart Array 5302/32 RAID Controller
• Hewlett-Packard 166207-B21 - Smart Array 5302/32 RAID Controller Reference Manual

Hewlett-Packard 166207-B21 - Smart Array 5302/32 RAID Controller Reference Manual

Download Reference manual of HP 166207-B21 - Smart Array 5302/32 RAID Controller Adapter, Controller for Free or View it Online on All-Guides.com. This version of HP 166207-B21 - Smart Array 5302/32 RAID Controller Manual compatible with such list of devices, as: 166207-B21 - Smart Array 5302/32 RAID Controller, 411508-B21 - Smart Array E200/128 BBWC Controller RAID, A9890A - Smart Array 6402/128 RAID Controller, ProLiant DL288, ProLiant DL360e

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

HP Array Configuration Utility 89

Error

code

Error message Comment or clarification

2843 Invalid Size

The specified size is invalid or is not possible with

the current configuration.

2844 Invalid Stripe Size

The specified stripe size is invalid, not supported

by the current RAID level, or not possible with the

current configuration.

2849

Invalid ClearConfigurationWithDataLoss

parameter

The valid parameters are Yes and No (default).

2850

Controller does not support Chassis

Name

The controller does not support setting a chassis

name.

2851 Invalid Chassis Name

The entered chassis name is invalid. Use

characters from the set a–z, A–Z, 0–9, !, @, #, *,

(, ), ,, -, _, +, :, ., /, and [space]. The name

cannot end with a space character or exceed the

maximum number of characters allowed by the

controller.

2852 Invalid SSP State The requested SSP state is not a valid SSP state.

2853 Cannot change SSP settings

The SSP settings cannot be changed for the

controller or logical drive.

2854 Invalid SSP Adapter ID

The adapter ID is not a valid adapter ID that was

detected by the controller.

2857 Invalid Surface Scan Delay —

2861

Controller does not support redundancy

settings

The controller is not redundant or does not

support redundancy settings.

2864 Invalid Preferred Path Mode

The specified value for the preferred path mode is

not valid, or the controller is not available.

2865 Invalid Preferred Path

The specified preferred path is not a valid chassis

slot for an available, active controller, or the

controller is not available.

2866 Failure opening capture file <text> —

2867 Failure opening input file <text> —

2868 Failure opening error file <text> —

2877 There are no suitable spares available

ACU found no drives that could be used as spares

for the specified array.

2880 Invalid Physical Disk Type Specified —

2882 Invalid MNP delay The specified value for MNP delay is invalid.

3000 Invalid Option

The value of the option supplied to this parameter

is invalid.

3002 Command Failed The controller returned an error for a command.

3003 License Key Delete Failed ACU is unable to delete the license key.

3004 Invalid Sector Size —

3005 Cannot delete Array —