Hewlett-Packard 2000fc Reference Manual
Download Cli reference manual of HP 2000fc Adapter, Switch for Free or View it Online on All-Guides.com.
120 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
set controller-date
Description
Sets the date and time of the Management Controller and then updates the date and
time for each RAID controller.
Input
set controller-date jan|feb|mar|apr|may|jun|jul|aug|sep|oct
|nov|dec day hh:mm:ss year time-zone [ntp enabled|disabled]
[ntpaddress IP-address]
Parameter Description
jan|feb|mar|apr|may|jun
|jul|aug|sep|oct|nov|dec
Specifies the month.
day Specifies the day number (1–31).
hh:mm:ss Specifies the hour on a 24-hour clock (0–23),
the minute (0-59), and the seconds (0–59).
year Specifies the year as a four-digit number.
time-zone Specifies the system’s time zone based on an
offset from Universal Time (UT) in hours. For
information about time-zone offsets, see
http://wikipedia.org.
ntp enabled|disabled Optional. Enables use of Network Time Protocol
(NTP). If an NTP server is available, the
controller’s time is synchronized with the server.
When enabling NTP you must specify all the
parameters but only the ntpaddress and
time-zone parameters must be set accurately;
the other parameters are ignored.
ntpaddress IP-address Optional. Specifies the network address of an
available NTP server. If specified, the controller
queries this server to get the current time and
date. If 255.255.255.255 is set instead of a
specific NTP server IP address, the controller
listens for time messages from an NTP server set
to broadcast mode.