Hewlett-Packard 2000fc Reference Manual
Download Cli reference manual of HP 2000fc Adapter, Switch for Free or View it Online on All-Guides.com.
15
CHAPTER
1
Using the CLI
This chapter introduces the HP StorageWorks MSA2000 Family command-line
interface (CLI) and includes the following topics:
■ “Accessing the CLI” on page 15
■ “Operation Modes” on page 16
■ “Command Syntax” on page 25
■ “Command Completion, Editing, and History” on page 28
■ “Viewing Command Help” on page 29
■ “Size of Devices and Logical Units” on page 29
■ “Event Log” on page 30
Accessing the CLI
The CLI software embedded in controller modules enables you to configure,
monitor, and manage a storage system out of band.
You can access the CLI in two ways:
■ By using a terminal emulator on a management host that is directly connected to
a controller module’s serial CLI port. See the user guide for information about
setting management port IP addresses using the CLI.
■ By using telnet, an SSH application, or a terminal emulator on a management
host that is remotely connected through a LAN to a controller module’s Ethernet
port.
The default usernames and passwords are:
Access Level Username Password
Monitor – to monitor system status monitor !monitor
Manage – to monitor and manage the system manage !manage