Hewlett-Packard 2000fc Reference Manual
Download Cli reference manual of HP 2000fc Adapter, Switch for Free or View it Online on All-Guides.com.
256 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
set protocols
Enables or disables one or more of the following management services and
protocols.
■ http, for standard access to SMU
■ https, for secure access to SMU
■ telnet, for standard access to the CLI
■ ssh, for secure access to the CLI
■ ftp, an alternate interface for firmware upgrade
■ Storage Management Initiative Specification (SMI-S)
■ Simple Network Management Protocol (SNMP)
■ Telnet service port 1023
■ Telnet debug port 4048
■ In-band CAPI management interface
■ In-band SES management interface
For details see “set protocols” on page 143.
show debug-log
Note – This command should only be used by service technicians, or with the
advice of a service technician.
Shows the debug logs for the Storage Controller (SC), the Management Controller
(MC), the semaphore trace, task logs, or all of them. If no logs are specified, all logs
are shown.
For details see “show debug-log” on page 169.
show debug-log-parameters
Note – This command should only be used by service technicians, or with the
advice of a service technician.
Shows which debug message types are enabled (on) or disabled (off) for inclusion
in the Storage Controller debug log.
For details see “show debug-log-parameters” on page 172.