Hewlett-Packard 2000fc Reference Manual
Download Cli reference manual of HP 2000fc Adapter, Switch for Free or View it Online on All-Guides.com.
Chapter 3 Command Descriptions 53
create iscsi-host
Description
iSCSI only. Associates a nickname with an iSCSI host initiator’s node name. You
can then use the nickname when mapping volumes to hosts.
Input
Example
Create the nickname myHost for the iSCSI host initiator with the node name
iqn.1991-05.com.microsoft:myHost.domain.
Related Commands
■ “delete iscsi-host” on page 75
■ “set iscsi-host” on page 134
■ “show iscsi-hosts” on page 195
create iscsi-host name name nickname
Parameter Description
name name Specifies an iSCSI host initiator’s node name. This is typically the
initiator’s IQN (iSCSI Qualified Name). This must not be an existing
node name, as displayed with the show iscsi-hosts command; it
must be one that you get from some other source of information. To
add or change a nickname for an existing node name, use set
iscsi-host.
nickname Specifies a nickname for the iSCSI host initiator. For the syntax to use,
see “Host Nickname Syntax” on page 27.
# create iscsi-host name iqn.1991-05.com.microsoft:myHost.domain
myHost
Success: adding iSCSI host done