Hewlett-Packard 2000fc Reference Manual
Download Cli reference manual of HP 2000fc Adapter, Switch for Free or View it Online on All-Guides.com.
66 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
assigned-to a|b|auto Optional. Specifies the controller to own the
virtual disk. To have the system automatically
load-balance virtual disks between controllers, use
auto or omit this parameter.
spare disks Optional. Specifies up to four vdisk spares to
assign to a RAID 1, 3, 5, 6, 10, or 50 virtual disk.
For the syntax to use, see “Disk Drive Syntax” on
page 25.
chunk-size 16k|32k|64k Optional. Specifies the chunk size in Kbyte. The
default is 64k.
mode online|offline Optional. Specifies whether the virtual disk is
initialized online or offline.
• online – Enables you to use the virtual disk
immediately after creating it while it is
initializing. Because online uses the verify
method to create the virtual disk, it takes longer
to complete initializing than offline. This
option is the default.
• offline – You must wait for the virtual disk
initialization process to finish before using the
virtual disk; however, offline takes less time
to complete initializing than online. At the
time of creation, a virtual disk using offline
initialization can have either one volume or
none. If you want the virtual disk to have more
than one volume, create the virtual disk with no
volumes and then add volumes after
initialization is complete.
name Specifies a name for the new virtual disk. For the
syntax to use, see “Virtual Disk Syntax” on
page 26.
Parameter Description