Hewlett-Packard 2000i Reference Manual
Download Reference manual of HP 2000i Adapter, Enclosure for Free or View it Online on All-Guides.com. This version of HP 2000i Manual compatible with such list of devices, as: 2000i, 2000sa, StorageWorks 2000i - G2 Modular Smart Array, StorageWorks 2000sa - G2 Modular Smart Array
Brand: HP
Category: Adapter , Enclosure , Storage
Type: Reference manual
Model: HP 2000i , HP 2000sa , HP StorageWorks 2000i - G2 Modular Smart Array , HP StorageWorks 2000sa - G2 Modular Smart Array
Pages: 118 (1.33 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
74 Viewing system status
Mapping properties
When you select the Maps component, the Maps for Volume table shows:
• Type. Explicit or Default. Settings for an explicit mapping override the default mapping.
• Host ID. WWPN or IQN.
• Name. Host name.
• Ports. Controller host ports through which the volume is mapped to the host.
• LUN. Volume identifier presented to the host.
• Access. Volume access type: read-write, read-only, no-access (masked), or not-mapped.
Schedule properties
If any schedules exist for the snapshot, when you select the Schedules component, the Schedules table
shows information about each schedule. For the selected schedule, the Schedule Details table shows:
• Schedule Name.
• Schedule Specification.
• Schedule Status.
• Next Time.
• Task Type.
• Task Status.
• Task State.
• Source Volume.
• Source Volume Serial.
• Prefix.
• Count.
• Last Created.
Viewing information about all hosts
In the Configuration View panel, right-click Hosts and select View > Overview. The Hosts table shows the
quantity of hosts configured in the system.
For each host, the Hosts Overview table shows the following details:
• Host ID. WWPN or IQN.
• Name.
• Discovered. If the host was discovered and its entry was automatically created, Yes. If the host entry
was manually created, No.
• Mapped. If volumes are mapped to the host, Yes; otherwise, No.
• Profile. If the host type is Standard, LUN 0 can be assigned to a mapping. If the host type is OpenVMS,
LUN 0 cannot be assigned to a mapping. If the host type is HP-UX, LUN 0 can be assigned to a
mapping and the host uses Flat Space Addressing.
Viewing information about a host
In the Configuration View panel, right-click a host and select View > Overview. The Host Overview table
shows:
• Host properties
• The quantity of mappings for the host
Select a component to see more information about it.