Hewlett-Packard Cisco Catalyst Blade Switch 3020 Release Note

Download Release note of HP 3020 Adapter, All in One Printer for Free or View it Online on All-Guides.com.

Brand: HP

Category: Adapter , All in One Printer , Enclosure , Laptop , Other , Printer , Printer Accessories , Server , Switch

Type: Release note for HP 3020

Pages: 22 (0.29 Mb)

Download HP 3020 Release note

HP 3020 Release note - Page 1
1
HP 3020 Release note - Page 2
2
HP 3020 Release note - Page 3
3
HP 3020 Release note - Page 4
4
HP 3020 Release note - Page 5
5
HP 3020 Release note - Page 6
6
HP 3020 Release note - Page 7
7
HP 3020 Release note - Page 8
8
HP 3020 Release note - Page 9
9
HP 3020 Release note - Page 10
10
HP 3020 Release note - Page 11
11
HP 3020 Release note - Page 12
12
HP 3020 Release note - Page 13
13
HP 3020 Release note - Page 14
14
HP 3020 Release note - Page 15
15
HP 3020 Release note - Page 16
16
HP 3020 Release note - Page 17
17
HP 3020 Release note - Page 18
18
HP 3020 Release note - Page 19
19
HP 3020 Release note - Page 20
20
HP 3020 Release note - Page 21
21
HP 3020 Release note - Page 22
22
Americas Headquarters:
© 2011–2012 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the Cisco Catalyst
Blade Switch 3020 for HP,
Cisco IOS Release 12.2(58)SE and Later
Revised April 23, 2011
Note Cisco IOS Release 12.2(58)SE images for all platforms were removed from Cisco.com because of a
severe defect, CSCto62631. The solution for the defect is in Cisco IOS Release 12.2(58)SE1.
Note If you are using Enclosure Bay IP Addressing (EBIPA), you must upgrade the HP Onboard
Administrator (OA) to firmware version 3.55 before you upgrade to Cisco IOS Release 12.2(58)SE or
later. If you do not upgrade the firmware, the HP OA will fail to assign an IP address to the Cisco Catalyst
Blade Switch 3020 module.
Cisco IOS Release 12.2(58)SE1 runs on the Cisco Catalyst Blade Switch 3020 for HP, referred to as the
switch.
If you wish to use Device Manager to upgrade the switch from Cisco IOS Release 12.2(35)SE through
Cisco IOS Release 12.2(40)SE1 (the LAN Base image) to Cisco IOS Release 12.2(50)SE or later (the IP
base image), you must first upgrade to Cisco IOS Release 12.2(40)SE2.
These release notes include important information about Cisco IOS Release 12.2(58)SE1 and any
limitations, restrictions, and caveats that apply to them. Verify that these release notes are correct for
your switch:
If you are installing a new switch, see the Cisco IOS release label on the switch packaging.
If your switch is on, use the show version privileged EXEC command. See the “Finding the
Software Version and Feature Set” section on page 3.
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the “Deciding Which Files to Use” section on page 3.
For the complete list of Cisco Catalyst Blade Switch 3020 for HP documentation, see the “Related
Documentation” section on page 21.
You can download the switch software from this site (registered Cisco.com users with a login password):