Hewlett-Packard BL680c - ProLiant - G5 Installation Instructions

Download Installation instructions of HP BL680c G5 Adapter, Desktop for Free or View it Online on All-Guides.com.

Brand: HP

Category: Adapter , Desktop , Printer , Server , Software

Type: Installation instructions for HP BL680c G5

Pages: 3 (0.93 Mb)

Download HP BL680c G5 Installation instructions

HP BL680c G5 Installation instructions - Page 1
1
HP BL680c G5 Installation instructions - Page 2
2
HP BL680c G5 Installation instructions - Page 3
3
HP ProLiant BL680c
Generation 5 Server Blade
Installation Instructions
Overview
Installation of a server blade requires the following steps:
1. Install and configure an HP BladeSystem c-Class enclosure.
2. Install any server blade options.
3. Install interconnect modules in the enclosure.
4. Connect the interconnect modules to the network.
5. Install a server blade.
6. Complete the server blade configuration.
For definitions of the acronyms used in this document, refer to
"Acronyms and abbreviations" in the server blade user guide.
Installing an HP BladeSystem
c-Class enclosure
Before performing any server blade-specific procedures, install an
HP BladeSystem c-Class enclosure.
The most current documentation for server blades and other
HP BladeSystem components is available at the HP website
(http://www.hp.com/go/bladesystem/documentation
).
Documentation is also available in the following locations:
Documentation CD that ships with the enclosure
HP Business Support Center website
(http://www.hp.com/support
)
HP Technical Documentation website (http://docs.hp.com
)
Installing server blade options
Before installing and initializing the server blade, install any server
blade options, such as an additional processor, hard drive, or
mezzanine card. For server blade options installation information,
see the HP ProLiant BL680c Generation 5 Server Blade User Guide
on the HP website
(http://www.hp.com/go/bladesystem/documentation
).
Installing interconnect modules
For specific steps to install interconnect modules, see the
documentation that ships with the interconnect module.
Interconnect device mapping
To support network connections for specific signals, install an
interconnect module in the bay corresponding to the embedded
NIC or mezzanine signals.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 452662-002
October 2007 (Second Edition)