Home | About | Contact

Hewlett-Packard P2000 Replacement Instructions

Download Replacement instructions of HP P2000 Chassis, Controller for Free or View it Online on All-Guides.com.

HP P2000 Replacement instructions - Page 1
1
HP P2000 Replacement instructions - Page 2
2
Page 1
background image

HP StorageWorks

Fibre Channel Transceiver
Replacement Instructions

This document details procedures for replacing a failed
Small Form-factor Pluggable (SFP) Fibre Channel
transceiver.

© Copyright 2008, 2009 Hewlett-Packard Development Company,
L.P.

Second edition: November 2009

The information in this document is subject to change without notice.

Printed in the US

www.hp.com

*481608-002*

About this document

For the latest product documentation, see the HP website at 

http://

www.hp.com/support/manuals

. Under the storage banner, navigate

to the page for your storage enclosure.

Warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein. To obtain a copy of the warranty for
this product, see the warranty information website: 

http://

www.hp.com/ go/storagewarranty

.

Before you begin

Observe the following:

CAUTION:

Transceivers that have been dropped may be damaged.
Problems resulting from a dropped transceiver include intermit-
tent errors and no port link. Mishandling fiber-optic cables
can degrade performance. Do not fold, pinch, or step on fiber-
optic cables. Do not bend fiber-optic cables tighter than a 2-
inch radius.

Parts can be damaged by electrostatic discharge; use proper
anti-static protection. Keep parts in electrostatic containers
until needed and ensure you are properly grounded when
touching static-sensitive components.

Verifying transceiver failure

Transceivers are part of the data path that includes multiple components,
such as the transceiver, a cable, another transceiver, and an HBA (host
bus adapter). When a fault is reported, it can be caused by any
component of the data path. To identify the location of the fault, check
the Link Status and Activity LEDs on the array controller and the server.
Check the cable path for kinks, crimping, or other issues. For detailed
LED information, see the user documents for the components.

Removing the failed transceiver

1.

Disconnect the fiber-optic cable.

2.

Depending on the transceiver model, rotate down or lift up the small
handle on the transceiver and gently pull on the handle to remove
the transceiver from the slot.

Page 1