Hewlett-Packard ProLiant SL4540 Quick Setup Instructions

Download Quick setup instructions of HP ProLiant SL4540 Adapter, Server for Free or View it Online on All-Guides.com.

Brand: HP

Category: Adapter , Server

Type: Quick setup instructions

Model: HP ProLiant SL4540 , HP ProLiant SL4545

Pages: 2 (0.77 Mb)

Download HP ProLiant SL4540 Quick setup instructions

HP ProLiant SL4540 Quick setup instructions - Page 1
1
HP ProLiant SL4540 Quick setup instructions - Page 2
2
Quick Setup Instructions
HP ProLiant SL4500 Series
Part Number: 683986-002
November 2012
Edition: 2
*683986-002*
683986-002
Site requirements
Select an installation site that meets the detailed installation site requirements
described in the site planning guide on the Documentation CD and on the HP
website (http://www.hp.com).
Verifying the pallet contents
Item Description
1 The HP ProLiant SL4500 Series chassis
2 Node
3* Hard drive blank
4* Hard drive
5* Power supply blank
6 Management module
7* Power supply
8 I/O module
9 System fans (5)
10 Access panel
11** Rack rails and cable management arm
12** Documentation CD
* The quantity depends on the conguration ordered.
** Not shown
Chassis component identication
Before installing front or rear components into the chassis, review device bay
numbering for each component.
Front panel components
Item Description
1 Node hard drives
2 LFF drive health LED
3 LFF drive UID
4 Drives controlled by the array controller
a. Port 1i
b. Port 2i
5 Drive display boards
6 Node VGA connector
7 Node USB connectors
8 Node power on/standby button and system power LED
9 Node health LED
10 Node release button
11 Node UID LED button
Conguration rules
Fans must be installed in all fan bays to meet thermal requirements.
An I/O module or I/O blank must be installed in all I/O bays.
A power supply or power supply blank must be installed in all power
supply bays.
Rear panel components
Item Description
1 System fans
2 I/O module
3 Management module
4 Power supplies
Device bay numbering
© Copyright 2012 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Setting up the chassis
WARNING: The chassis is very heavy. To reduce the risk of personal
injury or damage to the equipment:
Observe local occupational health and safety requirements and
guidelines for manual material handling.
Remove all installed components from the chassis before installing or
moving the chassis.
Use caution and get help to lift and stabilize the chassis during
installation or removal, especially when the chassis is not fastened
to the rack.
WARNING: To reduce the risk of personal injury or damage to the
equipment, you must adequately support the chassis during installation
and removal.
1.
Select the proper location for the setting up the chassis, based on
requirements provided in the HP ProLiant SL4500 Series Setup and
Installation Guide.
2.
Remove the packing materials from the pallet.
3. Remove any installed components from the chassis:
o Chassis hard drives
o Node
o System fans
o I/O module
o Management module
o Power supplies
Installing the chassis
The chassis requires installation in a rack. Install the rack rails, and then install the
chassis and other components.
For more information, see the HP ProLiant SL4500 Series Setup and Installation
Guide and the Quick Deploy Rail System Installation Instructions that ship with the
rack hardware kit.
Installing the front components
CAUTION: To prevent improper cooling and thermal damage, do not
operate the HP ProLiant SL4500 Series unless all hard drive and device
bays are populated with either a component or a blank.
Add any ordered options to the node.
Installing the node into the chassis
Install the component as indicated.
Translated versions
To view, select a language:
• English (http://www.hp.com/support/SL4540_4545_QSI_en)
• Français (http://www.hp.com/support/SL4540_4545_QSI_fr)
• Español (http://www.hp.com/support/SL4540_4545_QSI_sp)
• Deutsch (http://www.hp.com/support/SL4540_4545_QSI_gr)
•  (http://www.hp.com/support/SL4540_4545_QSI_jp)
•  (http://www.hp.com/support/SL4540_4545_QSI_sc)