Philips VOIP3211 Quick Start Manual

Download Quick start manual of Philips VOIP3211G - Cordless Phone / USB VoIP Cordless Telephone, IP Phone for Free or View it Online on All-Guides.com. This version of Philips VOIP3211G - Cordless Phone / USB VoIP Manual compatible with such list of devices, as: VOIP3211G - Cordless Phone / USB VoIP, VOIP3212G, VOIP3212G/37, VOIP3211, VOIP3211G/37

Philips VOIP3211G - Cordless Phone / USB VoIP Quick start manual - Page 1
1
Philips VOIP3211G - Cordless Phone / USB VoIP Quick start manual - Page 2
2
What’s in the box
What else will you need
Handset
Charger
2 Power supply
units
Quick start guide
1
2
3
Connect
Install
Enjoy
Welcome
Quick start guide
Installation CDROM
Internet connec-
tion (broadband
recommended)
Skype installed on
your PC and a
Skype account
(use the Skype
version provided
on the installation
CD for the hand-
set to work pro-
perly).
A desktop or a laptop
with free USB port
1
Install
Install the software
O Insert the installation CD into the
PC’s CD ROM (or DVDROM)
drive
O The installation program will start
automatically
O Follow instructions on the screen.
2
Connect
Once the drivers and sofware installed !
Connect the line
A
O Connect the telephone line cord
to the phone socket on the
bottom of the base unit and to
the wall phone socket.
3111 285 29692
Battery door
2 AAA battery
Base station
Line cord
Insert batteries
B
O Place the 2 rechargeable NiMH
AAA batteries, observing their
polarities, into the battery
compartment on the handset.
O Slide the battery door firmly into
place.
Connect the charger
C
O Insert the plug of the power cord
into the socket on the bottom of
the charger.
O Plug the power supply unit into
your power outlet.
Charge handset
D
O Before first use, put the handset
on the charger and charge
batteries for 24 hours minimum.
O To set the language of your
handset, press any key when you
see WELCOME.
O Select your country and press
OK.
A telephone line
In multipack sets you will find additional handsets, chargers with their power supply
and additional rechargeable batteries.
During the installation you will be asked to:
Connect USB plug
O Connect the USB plug directly to
your PC’s USB slot.
Finish installation
C
Use the Skype version provided on
the installation CD for the handset
to work properly.
O Click on Quit.
O Remove the installation CD from
the PC’s CDROM drive.
Go on following instructions on
the screen.
Connect to main supply
O Insert the plug of the power cord
into the socket on the bottom of
the base unit
O Plug the power supply unit into
your power outlet.
A
B
Index2 QSG_VOIP321_USA-EN.qxd 13.04.2006 15:58 Seite 1