Hewlett-Packard M3035 - LaserJet MFP B/W Laser Service Manual
Download Service manual of HP M3027 - LaserJet MFP B/W Laser All in One Printer, Cooktop for Free or View it Online on All-Guides.com.
Brand: HP
Category: All in One Printer , Cooktop , Printer
Type: Service manual
Model: HP M3027 - LaserJet MFP B/W Laser , HP M3035
Pages: 368 (12.5 Mb)
7. Does the job print as expected?
YES
Go to step 8.
NO
Print is garbled, or
only a portion of the
page prints.
●
Make sure that you are using the correct printer driver. (See the user guide.)
●
The data file that was sent to the device might be corrupt. To check, try printing the file to another
device (if possible), or try a different file.
●
Check the interface cable connections. Test the cable by trying it on another computer (if
possible).
●
Replace the interface cable with a high-quality cable (see
Parts and diagrams on page 269).
●
Simplify the print job, print at a lower resolution, or install more device memory.
●
You might be missing a device message that could help you solve the problem. On the Warning/
Error Behavior submenu (of the Device Behavior menu) at the device control panel,
temporarily turn off the Clearable Warnings and Auto-Continuable Events settings. Then,
print the job again.
Printing stops in the
middle of the job.
●
Stop might have been pressed.
●
Check that the power supplied to the device is steady, and that it meets device specifications.
(See
Electrical specifications on page 328.)
Print speed is slower
than expected.
●
Simplify the print job.
●
Add more memory to the device.
●
Turn banner pages off. (See the network administrator.)
●
Note that slower speeds should be expected if you are printing narrow paper, printing from tray 1,
using the HIGH 2 fuser mode, or if you have set Small Paper Speed to SLOW.
A control-panel
setting is not taking
effect.
●
Check settings in the printer driver or program. (The printer driver and program settings override
control-panel settings.)
The print job is not
formatted correctly.
●
Check that you are using the correct printer driver. (See the user guide.)
●
Check the program settings. (See the program online Help.)
●
Try a different font.
●
Downloaded resources might have been lost. You might need to download them again.
Media does not feed
correctly or is
damaged.
●
Make sure that the media is loaded correctly and that the guides are not too tight or too loose
against the stack of media.
●
If you are having problems printing custom-size paper, see the user guide.
●
If pages are wrinkled or curled, or if the image is skewed on the page, see
Troubleshoot print-
quality problems on page 248.
Print-quality
problems occur.
●
Adjust the print resolution. (See the user guide.)
●
Check that Resolution Enhancement Technology (REt) is on. (See the user guide.)
●
Go to
Troubleshoot print-quality problems on page 248.
ENWW Troubleshooting process 199