Hewlett-Packard M3035 - LaserJet MFP B/W Laser Service Manual
Download Service manual of HP M3027 - LaserJet MFP B/W Laser All in One Printer, Cooktop for Free or View it Online on All-Guides.com.
Brand: HP
Category: All in One Printer , Cooktop , Printer
Type: Service manual
Model: HP M3027 - LaserJet MFP B/W Laser , HP M3035
Pages: 368 (12.5 Mb)
8. Does the device select the correct trays?
YES
For other problems, check the table of contents or the index in this manual, or see the printer-
driver online Help.
NO
The device pulls
media from the wrong
tray.
●
Make sure that you have selected the correct tray. (See the user guide.)
●
Make sure that trays are correctly configured for size and type. (See the user guide.) Print a
configuration page to see current tray settings. (See
Use information pages on page 45.)
●
Make sure that the tray selection (Source) or Type in the printer driver or program is set correctly.
(The printer driver and program settings override the device control-panel settings.)
●
By default, media loaded in tray 1 will be printed first. If you do not want to print from tray 1,
remove any media loaded in the tray or change the USE REQUESTED TRAY setting. (See the
user guide.) Change TRAY 1 SIZE and TRAY 1 TYPE to a setting other than ANY.
An optional tray is not
working correctly.
●
Print a configuration page to verify that the tray is installed correctly and is functional. (See
Use
information pages on page 45.)
●
Configure the printer driver to recognize the installed tray. (See the printer driver online Help.)
●
Turn the device off, and then turn it on again.
●
Verify that you are using the correct optional tray for the device.
A message other than
READY appears on
the control-panel
display.
●
See
Control-panel messages on page 201.
200 Chapter 6 Troubleshooting ENWW