Hewlett-Packard 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Installation Manual
Download Installation manual of HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Carrying Case for Free or View it Online on All-Guides.com.
Brand: HP
Category: Carrying Case
Type: Installation manual
Model: HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive , HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter
Pages: 123 (6.86 Mb)
Download HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Installation manual
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
HP StorageWorks 1000 Modular Smart Array installation guide 25
NOTE: The MSA operates in a non-redundant mode during this procedure.
a. Access a supported management utility for the MSA.
b. In the utility, disable the controller to be removed.
For details, see the utility online help or MSA user documentation.
c. Wait for array controller disabled to display on the controller LCD panel.
d. Remove the disabled controller for servicing or replacement.
CAUTION: If an operational controller is removed without first being disabled, the active controller
might halt. To clear this fault condition, you must power-cycle the MSA.
For more information, see the HP StorageWorks 1000 Modular Smart Array maintenance and
service guide, available on the Technical documentation page of the MSA1000 website:
http://www.hp.com/go/msa1000
.
Plan your storage configuration
Proper planning of the system storage and its subsequent performance is critical to a successful
deployment of your MSA. Improper planning or implementation can result in wasted storage space,
degraded performance, or inability to expand the system to meet growing storage needs.
Considerations include:
• System and performance expectations
• Striping methods
• RAID levels
• Hard drive sizes and types
• Spare drives
• Array sizing (capacity)
System and performance expectations
To help you determine the best way to configure your storage, you must first rank the following three
storage characteristics in order of importance:
• Fault tolerance (high availability)
• I/O performance
• Storage efficiency
With your priorities established, you can determine which striping method and RAID level to use.
As highlighted in the following sections on Striping methods and RAID levels, some configuration
methods offer greater fault tolerance, while other configuration methods offer better I/O
performance or storage efficiency.