Hewlett-Packard 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Installation Manual
Download Installation manual of HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Carrying Case for Free or View it Online on All-Guides.com.
Brand: HP
Category: Carrying Case
Type: Installation manual
Model: HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive , HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter
Pages: 123 (6.86 Mb)
Download HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Installation manual
HP StorageWorks 1000 Modular Smart Array installation guide 59
2 Configuration procedures—Windows environments
Deploying the MSA in a Microsoft Windows environment involves:
1. Completing all Prerequisites, page 59
2. Installing MSA-specific components on the servers, page 60
3. Updating MSA controller firmware (if necessary), page 62
4. ”Configuring the storage” on page 63
Each of these procedures is discussed in the following paragraphs.
NOTE: HP recommends installing your MSA in the sequence of steps listed here and in chapter 1
of this guide. Specific dependencies exist, and if you deviate from this sequence, you may have to
uninstall and then reinstall your device.
Prerequisites
• Install and connect all equipment correctly, as detailed in ”Installation
procedures—All deployments” on page 13.
• Verify that the operating system version installed on the server is supported for use with the MSA.
For a current listing of supported operating system versions, see the QuickSpecs, available on
the Technical documentation page of the MSA1000 website:
http://www.hp.com/go/msa1000
.
• If using the ACU, install Microsoft Internet Explorer, version 5.5 or greater.
• Obtain documentation for the storage configuration tool you plan to use. Documentation for the
ACU and the CLI are available on the Documentation CD and the Technical documentation
page of the MSA1000 website:
http://www.hp.com/go/msa1000 .