Hewlett-Packard 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter Installation Manual
Download Installation manual of HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Carrying Case for Free or View it Online on All-Guides.com.
Brand: HP
Category: Carrying Case
Type: Installation manual
Model: HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive , HP 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter
Pages: 123 (6.86 Mb)
Download HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Installation manual
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
Configuration procedures—Other environments90
Operating system-specific notes
NOTE: SCO UNIX, VMware, OpenVMS, and Tru64 UNIX do not use the provided MSA Support
Software CD. These operating systems use the MSA-CLI to configure the storage and obtain the HBA
drivers and multipathing tools from a different source, such as through operating system updates or
the HP website.
NetWare environments
• Single-controller configurations are supported for use with active/passive firmware only.
• Dual-controller configurations are supported for use with either active/passive (using Secure Path
as the multipathing software) or active/active firmware (using the native NetWare MPIO
multipathing software).
• For information on upgrading the MSA to active/active, see the migration instructions for
NetWare environments, available on the Technical documentation page of the MSA1000
website: http://www.hp.com/go/msa1000
.
• If desired, NetWare environments can use the Array Configuration Utility to configure the MSA.
The ACU is provided on the MSA Support Software CD and can be installed and run from a
Windows or Linux server, or, the NetWare server can boot to the CD and run the ACU offline
from the CD.
• If using the ACU to configure the MSA, install Netscape Navigator version 6.2 or later or
Mozilla, version 1.0.2 or later with Personal Security Manager.
• After installing the MSA, be sure to set the host mode for each NetWare connection to netware.
• If the MSA is upgraded to 7.0 or later active/active firmware, do the following to activate the
native MPIO provided by Novell.
From the console:
a. Enter edit c:\nwserver\startup.ncf.
b. Add the following entry as the first line in the startup.ncf file:
set multi-path support = on
c. Locate the following entry and modify it:
d. For each HBA, verify that the following options are specified: load ql2x00.ham
slot=x/luns/allpaths/portnames, where x represents the slot number.
NOTE: The Native MPIO solution can co-exist with HP Secure Path for NetWare.
Old entry Modified entry
LOAD SCSIHD.CDM LOAD SCSIHD.CDM /AEN