Hewlett-Packard AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Maintenance And Service Manual
Download Maintenance and service manual of HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive Carrying Case, Network Hardware for Free or View it Online on All-Guides.com.
Brand: HP
Category: Carrying Case , Network Hardware , Speaker System , Storage , Switch
Type: Maintenance and service manual
Model: HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard Drive , HP AE326A - StorageWorks Modular Smart Array 1500 SAN SATA Starter , HP StorageWorks 1500cs - Modular Smart Array
Pages: 120 (6.76 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
Fibre Channel I/O module LEDs
The Fibre Chann
el I/O module has three bi-color LEDs. the following figure and table describe their
locations and meanings.
1
2
3
15506
Item Name
Condition Color
Description
Off
—
Power not applied to Fibre Channel
I/O module, controller not plugged
in, or unsuccessful controller POST
Solid
Green
Power app
lied and connection
establis
hed between Fibre Channel
I/O modu
le and Fibre Channel
control
ler
1
Status
Blinking Amber Power is applied but there is no
link to the controller or there is no
controller present
Solid
Green
A 1-Gb link is established and the
status is good
2
1-Gb link status
Blinking Amber A 1-Gb link was established but is
now inactive
Solid
Green
A 2-Gb link is established and the
status is good
3
2-Gb link status
Blinking Amber A 2-Gb link was established but is
now inactive
NOTE:
If both link status lights are Off, a link has not been established since the application of power,
initiation of a reset, hot-plug of Fibre Channel I/O module, removal of the transceiver, or
hot-plug of the transceiver.
If both link status lights are blinking amber, the MSA controller has been removed or a link cannot
be established.
maintenance and service guide
27