Hewlett-Packard Point of Sale rp5000 Getting Started Manual

Download Getting started of HP rp5000 Cash Register, Desktop for Free or View it Online on All-Guides.com.

Brand: HP

Category: Cash Register , Desktop

Type: Getting started

Model: HP rp5000 , HP Rp5000 - Point of Sale System

Pages: 32 (0.22 Mb)

Download HP rp5000 Getting started

HP rp5000 Getting started - Page 1
1
HP rp5000 Getting started - Page 2
2
HP rp5000 Getting started - Page 3
3
HP rp5000 Getting started - Page 4
4
HP rp5000 Getting started - Page 5
5
HP rp5000 Getting started - Page 6
6
HP rp5000 Getting started - Page 7
7
HP rp5000 Getting started - Page 8
8
HP rp5000 Getting started - Page 9
9
HP rp5000 Getting started - Page 10
10
HP rp5000 Getting started - Page 11
11
HP rp5000 Getting started - Page 12
12
HP rp5000 Getting started - Page 13
13
HP rp5000 Getting started - Page 14
14
HP rp5000 Getting started - Page 15
15
HP rp5000 Getting started - Page 16
16
HP rp5000 Getting started - Page 17
17
HP rp5000 Getting started - Page 18
18
HP rp5000 Getting started - Page 19
19
HP rp5000 Getting started - Page 20
20
HP rp5000 Getting started - Page 21
21
HP rp5000 Getting started - Page 22
22
HP rp5000 Getting started - Page 23
23
HP rp5000 Getting started - Page 24
24
HP rp5000 Getting started - Page 25
25
HP rp5000 Getting started - Page 26
26
HP rp5000 Getting started - Page 27
27
HP rp5000 Getting started - Page 28
28
HP rp5000 Getting started - Page 29
29
HP rp5000 Getting started - Page 30
30
HP rp5000 Getting started - Page 31
31
HP rp5000 Getting started - Page 32
32
12 www.hp.com Getting Started
Getting Started
Solving General Problems
Problem Cause Solution
Computer appears
locked up and will
not turn off when the
power button is
pressed.
Software control of
the power switch is
not functional.
Press and hold the power button
for at least four seconds until the
computer turns off.
Computer will not
respond to USB
keyboard or mouse.
Computer is in
standby mode.
Press the power button to
resume from standby mode.
Ä
CAUTION: When attempting to resume from standby mode, do not
hold down the power button for more than four seconds. Otherwise,
the computer will shut down and you will lose your data.
Computer date and
time display is
incorrect.
RTC (real-time clock)
battery may need to
be replaced.
Connecting
the
computer to
a live AC
outlet
prolongs
the life of
the RTC
battery.
First, reset the date and time
under Control Panel
(computer setup (F10) utility can
also be used to update the
RTC date and time). If the
problem persists, replace the
RTC battery. See the Hardware
Reference Guide on the
Documentation CD for
instructions on installing a new
battery, or contact an
authorized dealer or reseller for
RTC battery replacement.
Computer appears
to pause
periodically.
Network driver is
loaded and no
network connection
is established.
Establish a network connection,
or use computer setup (F10)
utility or Windows Device
Manager* to disable the
network controller.
*You must be logged in as an Administrator to access the Device Manager.
Cursor will not move
using the arrow keys
on the keypad.
The Num Lock key
may be on.
Press the Num Lock key. The
Num Lock light should not be on
if you want to use the arrow
keys.