Hewlett-Packard Point of Sale rp5000 Getting Started Manual
Download Getting started of HP rp5000 Cash Register, Desktop for Free or View it Online on All-Guides.com.
Brand: HP
Category: Cash Register , Desktop
Type: Getting started
Model: HP rp5000 , HP Rp5000 - Point of Sale System
Pages: 32 (0.22 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
24 www.hp.com Getting Started
Getting Started
Red Power LED
flashes four
times, once every
second, followed
by a two-second
pause.
cont.
None
cont.
Power failure
(power supply is
overloaded).
cont.
3. Check if a device is
causing the problem
by removing ALL
attached devices
(such as hard,
diskette, or optical
drives, and
expansion cards).
Power on the
system. If the system
enters the POST,
then power off and
replace one device
at a time and repeat
this procedure until
failure occurs.
Replace the device
that is causing the
failure. Continue
adding devices one
at a time to ensure
all devices are
functioning
properly.
4. Replace the power
supply.
5. Replace the system
board.
Diagnostic Front Panel LEDs and Audible Codes
Activity Beeps
Possible
Cause
Recommended
Action