Hewlett-Packard Point of Sale rp5000 Manual

Download Setup manual of HP rp5000 Cash Register, Desktop for Free or View it Online on All-Guides.com.

Brand: HP

Category: Cash Register , Desktop

Type: Setup manual

Model: HP rp5000 , HP Rp5000 - Point of Sale System

Pages: 22 (0.21 Mb)

Download HP rp5000 Setup manual

HP rp5000 Setup manual - Page 1
1
HP rp5000 Setup manual - Page 2
2
HP rp5000 Setup manual - Page 3
3
HP rp5000 Setup manual - Page 4
4
HP rp5000 Setup manual - Page 5
5
HP rp5000 Setup manual - Page 6
6
HP rp5000 Setup manual - Page 7
7
HP rp5000 Setup manual - Page 8
8
HP rp5000 Setup manual - Page 9
9
HP rp5000 Setup manual - Page 10
10
HP rp5000 Setup manual - Page 11
11
HP rp5000 Setup manual - Page 12
12
HP rp5000 Setup manual - Page 13
13
HP rp5000 Setup manual - Page 14
14
HP rp5000 Setup manual - Page 15
15
HP rp5000 Setup manual - Page 16
16
HP rp5000 Setup manual - Page 17
17
HP rp5000 Setup manual - Page 18
18
HP rp5000 Setup manual - Page 19
19
HP rp5000 Setup manual - Page 20
20
HP rp5000 Setup manual - Page 21
21
HP rp5000 Setup manual - Page 22
22
Computer Setup (F10) Utility Guide www.hp.com 1
Computer Setup (F10) Utility Guide
Computer Setup (F10) Utilities
Use the Computer Setup (F10) Utility to do the following:
Change factory default settings.
Set the system date and time.
Set, view, change, or verify the system configuration, including
settings for processor, graphics, memory, audio, storage,
communications, and input devices.
Modify the boot order of bootable devices such as hard drives,
diskette drives, optical drives, or HP Drive Keys.
Configure the boot priority of IDE hard drive controllers.
Enable Quick Boot, which is faster than Full Boot but does not
run all of the diagnostic tests run during a Full Boot. You can set
your system to:
always Quick Boot (default);
periodically Full Boot (from every 1 to 30 days); or
always Full Boot.
Enable or disable Network Server Mode, which allows the
computer to boot the operating system when the power-on
password is enabled, with or without a keyboard or mouse
attached. When attached to the system, the keyboard and mouse
remain locked until the power-on password is entered.
Select Post Messages Enabled or Disabled to change the display
status of Power-On Self-Test (POST) messages. Post Messages
Disabled suppresses most POST messages, such as memory
count, product name, and other non-error text messages. If a