Hewlett-Packard 7500 Series Installation Manual
Download Installation manual of HP Photosmart 7500 Firewall, Printer for Free or View it Online on All-Guides.com.
Brand: HP
Category: Firewall , Printer , Switch
Type: Installation manual for HP Photosmart 7500
Pages: 151 (9.19 Mb)
23
Figure 19 Installing a power supply
(1) Remove the blank filler (2) Push the power supply along the guide rails into the slot
(3) Fasten the captive screws
Follow the forward inertia of the power supply when inserting it into the chassis to ensure that the power
supply has firm contact with the connector on the backplane.
To prevent damage to the power supply and the connection terminals on the backplane, be sure to pull
out the power supply first in case of any misalignment, and then push it in again.
Connecting the power cord
W
ARNING!
Before connecting the power cord, make sure the power supply that connects to the power cord is switched
off.
Table 8 Power cord connection for the 7500 Switch Series
Model
Power input
(AC/DC)
PoE support Power cord connection procedure
300W AC AC No Connecting the 300W AC/650W AC power cord
650W AC AC No Connecting the 300W AC/650W AC power cord
1400W AC AC No Connecting a 1400W AC power cord
2800W AC AC Yes Connecting a 2800W AC power cord
6000W AC AC Yes Connecting a 6000W AC power cord
300W DC DC No Connecting the 300W DC/650W DC power cord
650W DC DC No Connecting the 300W DC/650W DC power cord
1400W DC DC Yes Connecting the 1400W DC power cord
Typically 10 A busbars are available in the equipment room but the 1400W AC, 2800W AC, and
6000W AC power supplies require a 16 A power cord (AC), so you need to use a 16 A busbar, and
1
2
3
3