Hewlett-Packard 7500 Series Installation Manual
Download Installation manual of HP Photosmart 7500 Firewall, Printer for Free or View it Online on All-Guides.com.
Brand: HP
Category: Firewall , Printer , Switch
Type: Installation manual for HP Photosmart 7500
Pages: 151 (9.19 Mb)
50
* BOOTROM, Version 3.01 *
* *
************************************************************************
Creation Date : Aug 26 2010
CPU Type : BCM1125H
CPU L1 Cache : 32KB
CPU Clock Speed : 600MHz
Memory Type : DDR SDRAM
Memory Size : 512MB
Memory Speed : 133MHz
BootRom Size : 512KB
Flash Size : 64MB
CPLD Version : 002
PCB Version : Ver.B
Mac Address : 0000FC007506
Press Ctrl+B to enter Boot Menu...0
Starting to get the main application file--flash:/7500.app!.....
..............................................
The main application file is self-decompressing................................
...............................................................................
...............done!OK
System is starting...
User interface aux0 is available.
Press ENTER to get started.
Press Enter at the prompt. When the prompt <Sysname> appears, you can configure the switch. For more
information about configuring the switch, see "Configuring the switch."
After powering on the switch, verify the following items:
• The cooling system is working, and you can hear fan rotating noise and feel air being blown out.
• The system status LEDs on the MPUs show that the system is operating normally. For more
information about LED behaviors, see "Appendix C LEDs."
Configuring the switch
By default, the switch does not authenticate the console login user at an AUX interface. To increase
system security and enable remote management:
• Configure remote access services, for example, Telnet or SSH.
• Configure authentication on each user interface, including the AUX interfaces.
Configuring authentication on a user interface
You can configure authentication on a user interface to control access to the switch.
Table 12 d
escribes the Telnet login authentication methods available for a VTY user interface.