Hewlett-Packard D6030A - NetServer - E50 Installation Manual
Download Installation manual of HP D6030A - NetServer - E50 Desktop for Free or View it Online on All-Guides.com.
Brand: HP
Category: Desktop
Type: Installation manual
Model: HP D6030A - NetServer - E50 , HP D7150A - NetServer - E60 , HP D9126AV - NetServer - E60 Select Express
Pages: 7 (0.02 Mb)
1
2
3
4
5
6
7
HP NetServer E 30
Windows NT 4.0 Installation Guide
This document presents the most important information that you need to install
Windows NT version 4.0. Please check with HP Support for information regarding
newer versions of Windows NT after they are released by Microsoft.. The first section
of this document is a list of helpful tips on Windows NT installation. The second
section is a step-by-step installation guide. Please see the CD-ROM-based HP
Information Assistant for additional detailed information to help you install Windows
NT.
Table of Contents
Section 1. Installation Tips
Extended Translation
Troubleshooting Host Adapter Configuration
DAT Drive
Boot Partition
Windows NT Setup Utility
BusTech SCSI Controller
Windows NT Installation Tips
Section 2. Windows NT 4.0 Installation Guide
Configuring Logical Disk Size for the Disk Array Controller
Booting from the Embedded SCSI Controller
Installing Windows NT 4.0
Upgrading to Windows NT 4.0
Section 3. Troubleshooting
Section 4. On-Line Information and Software Sources
Section 5. HP NetServer CD Status Report
Section 6. HP Information Assistant
Section 1. Installation Tips
Extended Translation
Run SCSI-Select and enable "Extended Translation for Drives larger than 1 GB." For
the bundled SCSI controller and certain Adaptec SCSI controllers (for example the
Adaptec AHA 2940) the "Extended Translation option" can be enabled from the SCSI-