Hewlett-Packard DL785 - ProLiant - G5 Installation Instructions Manual

Download Installation instructions manual of HP DL785 - ProLiant - G5 Desktop for Free or View it Online on All-Guides.com.

Brand: HP

Category: Desktop

Type: Installation instructions manual for HP DL785 - ProLiant - G5

Pages: 6 (0.31 Mb)

Processor Option Installation Instructions

for HP ProLiant DL785 Servers

Overview

This document provides the procedure for installing a processor and heatsink.

Kit contents

 Processor memory cell assembly (four)

 Processor with installation tool (four)

 Heatsink (four)

 DIMM filler (12)

 This document

SW1 instructions for quad-core 3.1 GHz or greater and six-

core processors

CAUTION: All supported AMD Opteron quad-core processors 3.1 GHz or greater and all

supported AMD Opteron six-core processors require the system maintenance switch,

located on the I/O backplane, (SW1) position 5 to be in the On position.

CAUTION: HP recommends updating to the latest version of firmware. Earlier firmware

versions might not validate the required switch setting for these processors.

NOTE: Six-core AMD Opteron Processors might show a 1 MB reduction in available L3

cache when performance enhancing HT Assist is enabled because HT Assist requires 1MB

of L3 cache per CPU to operate.

Installing a processor

The server supports a four- or eight-processor configuration.

CAUTION: The cell filler is required in cells 3 - 6 in a four-processor configuration.

CAUTION: To prevent damage to electrical components, properly ground the server before

beginning any installation procedure. Improper grounding can cause electrostatic

discharge.

CAUTION: To avoid damage to the processor and system board, only authorized

personnel should attempt to replace or install the processor in this server.

CAUTION: To prevent possible server malfunction and damage to the equipment,

multiprocessor configurations must contain processors with the same part number.

Top Brands