Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
SIP User's Manual 152 Document #: LTRT-68809
Mediant 2000
3.3.7.9.8 Configuring Release Cause Mapping
The 'Release Cause Mapping' page consists of two groups that allow the device to map up
to 12 different SIP Response Codes to Q.850 Release Causes and vice versa, thereby
overriding the hard-coded mapping mechanism (described in ''Release Reason Mapping''
on page 472).
Note: You can also configure SIP Responses-Q.850 Release Causes mapping
using the ini
file table parameters CauseMapISDN2SIP and
CauseMapSIP2ISDN (refer to ''ISDN and CAS Interworking-Related
Parameters'' 325 on page ).
To configure Release Cause Mapping:
1. Open the 'Release Cause Mapping' page (Configuration tab > Protocol
Configuration menu > Routing Tables submenu > Release Cause Mapping
Figure 3-84: Release Cause Mapping Page
page
item).
2. In the 'Release Cause Mapping from ISDN to SIP' group, map (up to 12) different
Q.850 Release Causes to SIP Responses.
3. In the 'Release Cause Mapping from SIP to ISDN' group, map (up to 12) different SIP
Responses to Q.850 Release Causes.
4. Click the Submit
5. To save the changes so they are available after a power fail, refer to ''
button to save your changes.
Saving
Configuration'' 173 on page .